Site work for a road / highway in Busby, Alberta. Completed plans call for site work for a road / highway.

Cold Milling, Asphalt Concrete Pavement, Street Light Installation, Selective Sideslope Improvement and Other Work 651:02 Hwy 33 - 6 Km E of Hwy 33 kilometre 0.000 to 6.000 651:02 W of Hwy 44 - Hwy 2 kilometre 34.380 to 50.775 Cold Milling, Asphalt Concrete Pavement, Selective Sideslope Improvement and Other Work 654:04 Hwy 33 - Hwy 777 kilometre 0.000 to 5.810 North Central Region APPROXIMATE QUANTITIES: 11 signs Pre-Construction Advertising Signs 45 995 tonne Supply of Aggregate - No Option 96 tonne Granular Base Course Des. 2 Class 25 189 metres Culverts - Remove and Dispose (C.S.P.) (up to 700 mm dia.) 63 metres Culverts - Remove and Dispose (C.S.P.) (over to 700 mm dia.) 140 metres Culverts - Supply and Install (500 mm dia. C.S.P.) 54 metres Culverts - Supply and Install (600 mm dia. C.S.P.) 275 tonne Granular Backfill - Culverts Des. 6 Class 80 2 040 cubic metres Backfill - Granular (B.F. 9659, 75550) Des. 6 Class 80 90 cubic metres Heavy Rock Riprap (Class 1) (B.F. 9659, 75550) 935 cubic metres Channel Excavation 2.5 km Sideslope Improvement 131 000 square metres Cold Milling Asphalt Pavement 50 mm Depth 420 tonne Gravel Surfacing 19 400 tonne Asphalt Concrete Pavement - EPS Mix Type M1 (PG 52-34) 25 900 tonne Asphalt Concrete Pavement - EPS Mix Type L1 (PG 52-34) 53.3 km Roadway Lines - Supplying Paint and Painting (Directional Dividing and 2 Edge Lines) 45.15 km Milled Rumble Strip - Shoulder 443 metres Strong Post W-Beam Guardrail - Supply and Install 7 units Pre-Cast Concrete Street Light Base - Supply and Install 7 units Street Light Standard - Supply and Install (13m x 2.5m Single Davit & Luminaire) Contractor to supply all materials. Scope of Work This portion of the work includes 3m slope end removal from each existing culverts ends and extending the culvert with a 1600 mm diameter CSP culvert. Without limiting the provisions of these specifications and contract, the scope of work shall include, but is not limited to the following: - Excavation - CSP - Supply - CSP - Assembly - Backfill - Heavy Rock Riprap (Class 1) - Erosion Control barrier (Silt Fence) - Miscellaneous Environmental Work The Contractor shall estimate and confirm quantities as necessary. If there are quantity discrepancies the Contractor shall advise of these during the tendering phase. The Contractor shall be responsible for obtaining the right-of-way easements if any construction is to occur outside the existing right-of-way and shall, prior to the commencement of any construction period, provide a copy of the easement agreement for the Consultant's review. The tables provided below illustrate the bridge file culvert locations, type, diameter, and length to be removed and disposed, supplied and installed. All locations and length of new CSP structure to be verified with the Consultant prior to commencement of the work including the ordering of materials. Scope The Work associated with this Contract includes the construction of a new lighting system as shown in the Contract Drawings. The general scope of work is as follows: - Supply and installation of galvanized steel single davit poles complete with concrete bases, frangible bases and luminaires - Supply and installation of power distribution cabinet - Supply and installation of underground cable systems for all light standards including any required conduit or junction boxes Highway lighting and signals work shall be carried out as shown on the Drawings and in accordance with section "2.25 Highway Street Lighting", "2.26 Traffic Signals" ,"2.7 Underground Electrical Conduits" of the "Standard Specifications for Highway Construction", latest edition, as well as the "Highway Lighting Guide".