Site work, paving and new construction of a mixed-use development in Layton, Utah. Completed plans call for the construction of a military facility; 7,000-square-foot, one-story above grade pre-engineered storage facility; for site work for a road / highway; for paving for a road / highway; water / sewer project; and transportation facility.

Award Details Contract Award Date: Jun 24, 2020 Contract Award Number: W9123520C0010 Task/Delivery Order Number: Contractor Awarded Unique Entity ID (DUNS): 042835439 Contractor Awarded Unique Entity ID (SAM): Contractor Awarded Name: GENEVA ROCK PRODUCTS, INC. Contractor Awarded Address: Orem, UT USA Base and All Options Value (Total Contract Value): $115213336.00 Design-bid-build (DBB) construction of the Missile Motor Receipt / Storage Facility located at the Utah Test and Training Range (UTTR) in Utah. The scope of this project is to construct eighteen (18) earth-covered Modular Storage Magazines (MSM) configured for air bearing operations for the staging of D5 missile motors. Each magazine will include a mechanical room and an elevated concrete dock and floor with air-pallet- bearing floor finish. Magazines will be located within the existing munitions storage area (MSA) security perimeter. The size of each magazine is based on the Navy Modular Storage Magazine, with modifications to the standard design to be approved by the Department of Defense Explosive Safety Board (DDESB) during the current design phase. This project will provide Anti-Terrorism/Force Protection (AT/FP) features and comply with AT/FP regulations, and physical security mitigation in accordance with DoD Minimum Anti-Terrorism Standards for Buildings. Supporting facilities include site preparation, special foundations, paving, AT/FP features, electrical utilities (primary and secondary distribution, lighting, transformers, telecommunications infrastructure, lightning protection), and mechanical utilities (sanitary sewer, potable water supply, fire protection). A 7,000 SF, single story, pre-engineered steel-framed, thermal-controlled Motor Transfer Facility (MTF) will be constructed with enclosed vehicle bays, an elevated concrete dock for air pallet operations and concrete pedestals for jacking boxcar. Built-in equipment at the MTF includes a bridge crane (60-tons) with dual trolleys. The site includes concrete paving, parking stalls and perimeter security fencing. Approximately fifteen (15) miles of railroad track will be constructed to support the movement of specialized D5 boxcars carrying D5 First Stage/Second Stage (FS/SS) missile motors from the Union Pacific (UP) connection point at Lakeside, Utah, to the UTTR, and the movement of the empty boxcars back to the UP point. The track roadbed section includes the grading for the track, ditches, subballast, and ballast. A wye track will be constructed to allow turning of boxcars. The track also includes a boxcar holding area (BHA) track for loaded or unloaded D5 box car marshalling and maintenance with containment pans for servicing the boxcars. Acquisition Information: This acquisition is proceeding as an unrestricted competitive solicitation Estimated Cost Range is between ($25,000,000 $100,000,000). DFARS 236.204(ii) Period of Performance (POP) for Construction: 730 days This Procurement will be conducted under PSC CODE: Y1GA, NAICS Code: 236220. The size standard for this code is $36,500,000. All questions should be directed to the Contract Specialist, Deanna C. Zemovich e-mail Deanna.C.Zemovich@usace.army.mil. Plans and specifications will NOT be provided in hard paper copy or CD-ROM format. The solicitation and all amendments for this acquisition will be posted on a secure Government website known as FedBizOpps (www.fbo.gov) once the RFP is issued. Viewing/downloading documents from FedBizOpps will require prior registration in System for Award Management (www.sam.gov). If you are a first-time FedBizOpps user, you will also be required to register in FedBizOpps before accessing the RFP documents. To register, click on the Register Now button in the Vendors Block and follow the instructions. The following information will be required: System for Award Management (SAM) Marketing Partner Identification Number (MPIN); DUNS Number or Cage Code; Telephone Number; and E-mail Address. Once registered with FedBizOpps, interested parties will then be able to log in and access the RFP documents. Important Note: Solicitation documents can be accessed ONLY via FedBizOpps. Please note that ALL contractors who want to register with FedBizOpps must be registered in SAM, and have a MPIN, DUNS number or Cage code. For further information, please click on the FedBizOpps homepage link and the Vendor User Guide. The only PLAN-HOLDER'S/BIDDER'S LIST now available is via FedBizOpps. When viewing the Synopsis/Pre-solicitation Notice, you will click on the 'ADD ME TO INTERESTED VENDORS' to enter your information. This function does not, however, allow you to identify yourself as a Prime or Sub. It is recommended that you identify your category in parentheses at either the beginning or end of your company name. For example: (Prime/Sub) XYZ Construction, or XYZ Construction (Prime/Sub). It is the Responsibility of the Contractor to Check Fedbizopps Frequently for Any Amendments or Changes to the Solicitation. UTTR Directions / Meeting Location - From the SLC airport, get onto I-80 West and proceed 55 miles to exit 62 Military Area. - Exit right and stay right 0.2 miles and proceed 17 miles north. - Stay left at fork (dirt road to the right) and proceed 1.4 miles to UTTR Gate. - Park in the northern adjacent parking area at east gate entrance. - Enter adjacent westerly building and proceed through security to the conference room Construction began on September 1, 2020.