Renovation of an educational facility in Milwaukee, Wisconsin. Completed plans call for the renovation of a educational facility.

The work under this section consists of providing all work, materials, labor equipment and supervision necessary to provide thermally insulated hollow metal doors with frames. For the following: SINGLE PRIME CONTRACT including: General Construction Drawings, project manual, and other bid documents may be viewed and ordered online by registering at the Reprographic Technologies Planwell website, . Telephone orders will also be accepted; phone numbers below. Documents are not available electronically at this time. Bidding documents are available for examination free of charge at various sites. For a list of sites or other project information, please call 414-297-6236. See Instructions to Bidders for details. A Bid bond or certified check equal to 10% of the bid must accompany each bid. All bids and bonds must be on blank forms provided for that purpose, and the amount of the bid shall be stated in writing and in figures. Bids should be submitted in a sealed envelope provided for that purpose, and branch of work (all inclusive single prime for this project) and reference number must be indicated on the outside of the envelope. Bids must be guaranteed and cannot be withdrawn for a period of sixty days following the date of opening. The following forms must accompany each bid: Disclosure of Ownership (if applicable), Affidavit of Noncollusion and/or Conflict of Interest. Blank forms for that purpose are provided with the bid package. There is a goal of 18% for the participation of Historically Underutilized Businesses (HUB) in this contract. The successful bidder will be required to provide a list of HUB firms participating in the work as part of the post bid submittal to MATC. See HUB Participation Guidelines and Instructions to Bidders. The apprenticeship requirements for this project are as follows: Apprentices are mandatory from the two (2) of the following four (4) trades: General Laborer; Carpenter; Concrete Finisher; Painter. The successful bidder will be required to provide a list of Apprentice Categories from those listed above which will be utilized during this period. This list must be provided as part of the post bid submittal to MATC. See Apprenticeship Participation Requirement Guidelines and Instructions to Bidders. The Board reserves the right to reject any and all bids, waive informalities, or accept any bid which it may deem to be in the best interest of the Board.