This is a service / maintenance or supply contract in Jacksonville, Florida. Contact the soliciting agency for additional information.

Award Details Contract Award Date: Oct 29, 2020 Contract Award Number: N69450-21-D-0003 Task/Delivery Order Number: Contractor Awarded Unique Entity ID (DUNS): 116946506 Contractor Awarded Unique Entity ID (SAM): Contractor Awarded Name: MERRICK-RS&H JOINT VENTURE, LLP Contractor Awarded Address: Greenwood Village, CO USA Base and All Options Value (Total Contract Value): $45000000.00 Award Details Contract Award Date: Sep 24, 2020 Contract Award Number: N69450-20-D-0052 Task/Delivery Order Number: Contractor Awarded Unique Entity ID (DUNS): 003184462 Contractor Awarded Unique Entity ID (SAM): Contractor Awarded Name: AECOM TECHNICAL SERVICES, INC. Contractor Awarded Address: Los Angeles, CA USA Base and All Options Value (Total Contract Value): $45000000.00 This procurement will result in two (2) Indefinite Delivery/Indefinite Quantity (IDIQ) contracts for multi-discipline Professional Architect-Engineer (A-E) services for the preparation of DesignBid-Build contract documents and Design-Build Request for Proposals for various project types at DoD and Non-DoD activities in the Naval Facilities Engineering Command Southeast Area of Responsibility. These services will be procured in accordance with 40 USC Chapter 11, Selection of Architects and Engineers as implemented by FAR Subpart 36.6. The IDIQ contract will be for a period of five (5) years. The total value for each contract shall not exceed $45M (Forty-Five Million Dollars). The guaranteed minimum for the contract term is $20K (Twenty Thousand Dollars) for each contract. Firm-fixed price task orders will be negotiated for this contract. There will be no dollar limit per task order and no dollar limit per year. Estimated start date is expected to be December 2019. This proposed contract is being solicited on an UNRESTRICTED basis. The North American Industry Classification System (NAICS) Code is 541330, Engineering Services, and the Small Business size standard is $15,000,000. The Government seeks the most highly qualified firm to perform the required services, based on the demonstrated competence and qualifications, in accordance with the selection criteria. Comprehensive A-E services are required for the new construction, repair, replacement, demolition, renovation, alteration, and/or improvement of DoD facilities, including, but not limited to: 1) Aviation and aircraft facilities; 2) Marine facilities; 3) Barracks and personnel housing facilities; 4) Administrative facilities; 5) Warehouses and supply facilities; 6) Training facilities; 7) Personnel support and service facilities; 8) Security level facilities; 9) Abatement and handling of hazardous/regulated materials (including but not limited to asbestos, lead paint, mold remediation, and polychlorinated biphenyls). Projects may also require comprehensive interior design and incorporation of sustainable features. Projects may include single or multiple disciplines, including, but not limited to, structural, civil, mechanical, electrical, architectural, planning, environmental, fire protection, cost estimating, and/or geotechnical. Specific types of A-E services that may be required under this contract include: facility planning and project development, development of requirements and project scope, development of designbid-build packages, development of design-build Request for Proposal (RFP) packages, preparation of cost estimates using unit guidance and parametric cost estimating, development of alternatives and economic analysis, condition assessment, above and underwater inspections, service-life modeling, vessel collision analysis, field investigations (including utility and geotechnical), surveying and mapping, soil borings, hazardous materials testing and identification, preparation of engineering evaluations, inspections, consultations, energy computations, conceptual designs, obtaining permits and regulatory approvals, environmental investigation and consultation, review of contractor submittals, field consultation and inspection during construction, commissioning, Operation and Maintenance Support Information (OMSI), as-built drawing preparation, FACD/design charrette/other design and construction related workshops and meetings, Title II services, and incorporation of sustainable engineering design practices. Facility planning and project development includes: planning studies including scientific, project programming documents (DD Form 1391 development), developing of requirements, preparing engineering evaluations, project scope, unit guidance or parametric cost estimating, cost valuation surveying, development of alternatives and economic analysis, analysis of proposed sites for foundations, utilities, access, constraints and identification of environmental issues, concept and site sketches, recommendations on potential utilities impacts, sustainable features, and may require enhancement of previously prepared basic documentation. DD Form 1391 documentation will be required to be prepared in the Navy's Electronic Procurement Generator (EPG). A-E firms are required to prepare cost estimates utilizing the MCACES MII estimating system and detailed cost estimates, specifications in the SPECSINTACT program, design-build RFPs utilizing current NAVFAC Design-Build Masters, and drawings in AutoCAD (2016 or higher) utilizing the National CADD Standards format with NAVFAC specified modifications. 3D modeling and BIM modeling may also be required. Selected firm will be required to provide documents in PDF and native formats. Final documents will require electronic signatures following the NAVFAC signature process and using required software. All projects will require design in the Inch-Pound system, unless specifically documented in the individual task order. A-E firms or others under contract or providing services to NAVFAC may request software installation packages from NAVFAC Atlantic CI Cost. The A-E is to send an email to NAVFAC-CI-Cost@navy.mil with the following in the Subject Section "MII License Request". Software is generally distributed to A-Es free of charge, however, accompanying database licenses must be purchased and licensed as appropriate by the user. Hazardous material assessments including asbestos and/or lead-based paint assessments may be required on this contract to determine the presence of hazardous material(s) during removals/demolition or at utility points of connections. Work on and around waterfront structures, including under deck and underwater, and work in confined spaces may be required on this contract. A-E firms must be able to accept work that involves asbestos, lead paint, PCBs, and other hazardous materials, work on and under waterfront structures, and in confined spaces. All engineering and design services shall comply with the most current edition of FC 1-300-09N Design Procedures, and other requirements as indicated on the Whole Building Design Guide Site (wbdg.org). Selected A-E firms are required to have online access to web-based support programs and email via the internet for routine exchange of correspondence/information. Selected A-E firms are required to submit and maintain an A-E Accident Prevention Plan (APP) in accordance with USACE EM 385-1-1 for each project on this contract and Activity Hazard Analysis (AHA) for each in-field action. Key personnel, including sub-consultants, must be U.S. citizens and able to obtain security clearances as required and may be required to have employee and facility security clearances up to Top Secret. All new projects in this contract will include either initiatives to seek certification under the US Green Building Council's Leadership in Environmental Engineering and Design (LEED(TM)) with a goal of achieving LEED Silver certification or Green Building Initiative (GBI) "Guiding Principles Compliance" (DoD versions only). NAVFAC now requires all new general building construction projects to follow the latest version of UFC 1-200-02 "High Performance and Sustainable Building Requirements" (HPSB). All work shall be done in English units, as directed by the Government. Selected firms will not be able to propose on Design-Build task orders for which the firm or any of the firms' subcontractors have assisted the Government in the preparation of the Design-Build technical statement of work or plans and specifications. The method of contractor selection has not been determined at this time.