Water Plant No. 2: The work includes, but is not limited to: touch-up coating the GST No. 1 overflow weir box; touch-up coating the GST No. 1 overflow line; wire brushing and applying a cold galvanizing spray to the surge protection device hardware; touch-up coating the HPT No. 1 support base; blasting and recoating the BP Nos. 1, 2, & 3 flanges and discharge heads; touch-up coating the exterior roof panels of the booster pump building; and all else specified and shown in the contract documents required for a complete and functional water plant facility. Water Plant No. 3. The work includes, but is not limited to: blasting and recoating the interior floor and walls of GST No. 2; touch-up coating the galvanized steel surface water fill line interior piping for GST No. 2; recoating the transition coupling and hardware and the plug and restraints of the groundwater fill line interior piping for GST No. 2; touch-up coating the interior and exterior roof flange of the probe holder, the electrical conduit elbow, and hardware; touch-up coating the GST No. 2 overflow weir box; cleaning and touch-up coating the surface water sample booster pump floor mounting bracket; touch-up coating the HPT No. 1 cabinet interior; touch-up coating the BP Nos. 1, 2, 3, & 4 air release valves; blasting and recoating the BP Nos. 1, 2, & 4 discharge heads; touch-up coating the BP No. 3 gate valve; touch-up coating the aboveground Water Well No. 3 piping; touch-up coating the Water Well No. 3 air release valve; touch-up coating the GST No. 1 overflow weir box; seal welding 4"x4"x1/4" welded steel plates to the interior surface of GST No. 2; and all else specified and shown in the contract documents required for a complete and functional water plant facility. Project Locations : 5531 QUEENSTON BLVD., HOUSTON, TEXAS 77084 and 17201 1/2 COPPER CROSSING COURT, HOUSTON, TEXAS 77084
.webp)
