Renovation of a water / sewer project in Wilmington, Massachusetts. Working plans call for the renovation of a water / sewer project.

As of January 6th, 2021 the bids for this project have been rejected. The owner has stated the bids were over budget and the project will not be awarded. Work to be performed under this Contract includes, but is not limited to, providing all materials, equipment, labor and supervision to: remove and replace approximately 60 linear feet of 15-inch gravity sewer; install cured-in-place spot repair (CIPSR); furnish and install a new sewer manhole with an access hatch, new channel grinder, a rail system to raise and lower said channel grinder, new grinder control panel, buried electrical conduit and wiring, new fencing, new access gate, new trees/shrubs, and all associated site work and appurtenances. The Contractor shall furnish all labor, services, materials, equipment, plant, machinery, apparatus, appliances, tools, supplies, and all other things necessary to do all work required for the completion of each item of the Work and as herein specified. The Work to be done and paid for under any item shall not be limited to the exact extent mentioned or described but shall include all incidental work necessary or customarily done for the completion of that item. Scope: 1. CONTRACTOR shall provide and maintain methods, equipment, and temporary construction as required to control environmental conditions at the Site and adjacent areas. 2. Maintain controls until no longer required. 3. Temporary controls include, but are not limited to, the following: a. Erosion and sediment controls. b. Dust control. c. Pest and rodent control. d. Control of water, including stormwater runoff. e. Pollution control. Pilcher Drive Pump Station Grinder - Installation of new sanitary sewer manhole along an existing gravity sewer, installation of new wastewater grinder unit, and associated electrical work.