Demolition, site work, renovation and addition to a detention facility in Coxsackie, New York. Completed plans call for the addition of a detention facility; for the demolition of a detention facility; for the renovation of a detention facility; and for site work for a 4,800-square-foot, two-story above grade detention facility.

Estimated Cost $7,000,000 - $8,000,000 The existing ventilation systems, both supply air and exhaust air equipment serving Building 45 must remain in service until the replacement ventilation equipment is installed, cleaned and tested. The hot water supply and return piping systems may be taken out of service only during the Non-Heating Season from May 1st through October 15th. C. Perform the following Work during the Non-Heating Season from May 1st through October 15th, 2020: 1. Install air handlers AHU-1 and AHU-2: a. Install the concrete pads, set the air handler and modify the outside air ductwork to allow for AHU-1 and AHU-2 to be installed while he existing equipment is operational. Include all related electrical and controls work to support the air handlers temporarily, until the complete HVAC system can be installed. D. Perform the following Work during the Non-Heating Season from May 1st through October 15th, 2020: 1. Equipment Removals and replacement of HX-1, HX-2, EF-1 and EF-2: a. During this phase, only the air handler will be operating and therefore only outside air or supply air will be provided to the spaces. Excess supply air will be relieved through the existing gravity relief systems in the core and open ducts throughout the space. C Contract- Submittal No. 4: Site Specific Safety Plan per Specification 011100 Safety not later than 5 days after approval of the Contract by the Comptroller. C Contract- Submittal No. 5: Truck Trap, Fencing, Gates, Security System Plan pe Specification 011100 not later than 5 days after approval of the Contract by the Comptroller. C Contract- Submittal No. 6: Woven Rod Detention Screen Shop Drawings and Product Data per Specification 055000 Metal Fabrications not later than 5 days after approval of the Contract by the Comptroller. C Contract- Submittal No. 7: Structural Steel Shop Drawings and Product Data per Specification 051200 Structural Steel not later than 5 days after approval of the Contract by the Comptroller. C Contract- Submittal No. 8: Shop Drawings and Product Data per Specification 085662 Steel Detention Windows not later than 5 days after approval of the Contract by the Comptroller. C Contract- Submittal No. 9: Schedule, Shop Drawing Package per Specification 081102 Steel Doors and Frames, 111901 Detention Equipment not later than 5 days after approval of the Contract by the Comptroller. C Contract- Submittal No. 10: Brick Veneer Product Data and Sample per Specification 042113 Brick Masonry not later than 5 days after approval of the Contract by the Comptroller.