Renovation of a municipal facility in Centennial, Colorado. Completed plans call for the renovation of a municipal facility.

Proposals were received by 6 contractors. 1. B & M Roofing of Colorado Inc. 2. Douglass Colony 3. Empire Roofing and Sheetmetal_ 4. Modern Roofing LLC 5. Superior Roofing & Sheet Metal_ 6. Tecta America Colorado, LLC Notice is hereby given that the Arapahoe County Purchasing Division will be accepting proposals from qualified licensed professional roofing contractors for the purpose of performing general roofing services required to replace the entire roof at Arapahoe County Sheriff/Coroner Office General Requirements - Bid Deposit Required - Local Service Required - Contractors License Required Award Requirements - All or None Award Bid Bond - 5 % Pre-Bid info - Contractors who fail to arrive at the pre-proposal conference at the scheduled starting time (our clock) shall be considered non-responsive and ineligible for award. Contractors shall take all necessary precautions with going through secure facility, i.e. tools, camera, etc. and plan extra time. Questions are submitted online - No Closing Date - 09/03/2020 04:00 PM EDT This project is for a full roof replacement of the existing black EPDM roof assemblies with a tan PVC roof system. Refer to the Roof Plans and Detail Drawings, as well as Divisions 06 and 07 within the Specifications for roof assembly installation. 1. Removal and replacement of the existing roof assembly and/or roof membrane. 2. Removal and replacement of wall flashings. 3. Removal and replacement of curb flashings. 4. Removal and replacement of damaged plywood sub-structure as required. 5. Removal and replacement of electrical penetration flashings. 6. Removal and disposal of unused items as noted by the Owner and where shown on the drawings. 7. Remove and reinstall lightning protection system as a delegated design and drawing sheet R-600. 8. Disconnect, store, and reinstall the existing ballasted/freestanding radio equipment. Disconnecting of equipment to be coordinated with Arapahoe Count a. Remove and Clean all accumulated surface debris. Clean all existing EPDM membrane to remain. b. Pitch pan or field wrap all steel and gas line penetrations. c. Liquid flash all exposed steel to existing EPDM interfaces. d. Install new scratch/protection pads under all stands. e. Liquid flash all wall penetrations or wrap with EPDM tape. f. Replace T-Patch at all existing seam intersections. g. Liquid flash all surface mounted equipment and electrical boxes. h. Reconfigure or replace wall mounted access hatches to maintain watertight detailing and conditions.