Site work and paving for a road / highway in Ewing, New Jersey. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Sealed bids for Mill and Pave at 1661 North Olden Avenue Cut sizes for this process shall be of various widths and lengths. The depth of milling of existing roadway shall be up to 2 inches. The milling machine shall be equipped with automatic grade control system, either ski type or string line. Areas to be milled which are not accessible to the milling machine shall be removed by other equipment. The milling operation shall be carried out in a manner that prevents dust and other particulate matter from escaping into air. The contractor shall be responsible for hauling away and disposing of the milled material without any extra cost to the City of Trenton. The surface of the milled area shall be swept clean prior to being opened to traffic and prior to the subsequent construction or resurfacing stage. The milling shall provide a skid resistance not less than that of the original surface prior to milling and shall permit the safe passage of traffic. Work Shall Be Completed 30-days From Notice to Proceed. The following information is supplied to bidders for the restoration of roadway pavements, sidewalks, curbs, driveway, and driveway aprons inclusive of valve box resetting over water utility installations for the City of Trenton, Department of Water and Sewer. Work shall be performed at 1681 N Olden Ave and in the Burger King entrance. This Road is under the jurisdiction of the Mercer County DOT. The milling and overlaying shall be done in accordance MCDOT specifications. Any alterations in the scope of work shall be approved by the General Chief Engineer of Trenton Water Works.