Site work and paving for a road / highway in Maynard, Massachusetts. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Contractor Qualification Highway Division SCOPE OF SERVICES The work consists of pavement mill and overlay on one (1) street and pavement reclamation with base and surface courses on two (2) streets. Mill and Overlay: For mill and overlay sections, the contractor shall mill the existing pavement to a depth of 2", remove and dispose of the millings, machine pave a 2" surface course of bituminous concrete, and adjust manholes, gate boxes, and catch basins as necessary. The contractor shall also replace all existing pavement markings on repaved streets in kind. No line items are included for any required pavement markings in the Bid Sheets. The street to be treated with mill and overlay is: Nason Street - A 250' by 30' section of Nason Street (approximately #12 Nason to #42 Nason as marked out by DPW in the field prior to milling operations). Note: No vibratory roller will be allowed on this section of Nason Street during paving operations. Reclaim: For reclaim sections, the contractor shall perform one test pit per every 1,000 linear feet of road (minimum of two per street) to determine average existing pavement depth. The contractor shall reclaim existing pavement to a depth at least 3" deeper than existing pavement depth, dispose of excess material, fine grade and compact the reclaimed asphalt/gravel material, and re-pave with 2" bituminous concrete base course and 1.5" bituminous concrete top course. The contractor shall also replace all existing pavement markings on repaved streets in kind. The streets to be reclaimed are Brooks Street - from Concord Street to Jethro Street; existing granite curb at #55 Brooks shall be retained Durant Avenue - from Dana Road to end of and inclusive of cul-de-sac; HMA berm to be replaced