Renovation of an educational facility in Montreal, Quebec. Completed plans call for the renovation of a educational facility.

Reference number : 1426401 Deadline for receipt of complaints: 2020-12-04 Electronic submission accepted: Yes, in a single submission document Expected duration of the contract (in months): 4 Value of the Bid Security (amount or percentage) 10% OF THE TENDER AMOUNT The University of Montreal is issuing a call for tenders in order to retain the services of a general contractor for construction work to be carried out at the Roger-Gaudry Pavilion (511) located at its Montreal Campus. Summary of the project and the work to be carried out This project consists of reviewing the layout of suites G-300, G-303 and G-307 in the Roger-Gaudry Pavilion (511) in order to fit out a new transfer room, Sorting space, as well as reviewing the development of the student store. The main works included in this project are described as follows, but not limited to: DEMOLITION Dismantling of existing furniture (tables / work surfaces / shelves), Dismantling and modification of existing furniture (shelving, shelves) and their relocation in the existing storage space. Smoothing of the concrete floor in order to overcome all cracks and other defects. Partial demolition of the partitions separating rooms G-300 and G-307. Demolition of existing vinyl flooring. Demolition of the existing entrance (turnstile) as well as the counter of the existing store. Enlargement of the existing opening (s) in the concrete block wall separating rooms G-300 and G-303 to allow the transport of goods from the G-30 corridor to the back of the store. The minimum dimensions required must be verified with the store users according to the dimensions of the trolleys used by the deliverers. Demolition of the exterior double door and its frame. Demolition of the existing suspended ceiling. NEW Modification and leveling of concrete borders with a slight slope between the existing doors and the high point of the border (see ing). All concrete will be covered with a membrane. Installation of a slatted floor, in reinforced plastic fibers. The retention pit will be able to hold approximately 1800 L, in the event of a spill. (see Ing) Installation of a new counter, resistant to the weight of the containers and to chemicals. Various leveling and fire-resistant sealing work on the walls and ceiling. Installation of new gypsum fire partitions, separating the new sorting room G-307-5 and the existing storage room G-300. Installation of new doors and frames, some of them homologated. Installation of a new sink, as well as an eye wash (see ing). Sealing and fireproofing of existing or new conduits passing through partitions (sprinklers, ventilation, etc.). New floor covering in epoxy paint, Painting work on new and existing partitions. Electromechanical and structural works. (see engineers). Dismantling / modification / relocation of existing furniture (shelves) according to the new layout. Waterproofing work on the roof when passing ventilation ducts and / or the reinforcement structure through the existing bridging (see ing.). All the work will be guaranteed by the contractor together with the AMCQ guarantee for a period of ten (10) years , including any component of the roof supplied and installed (materials & labor); Modification of the store entrance and installation of a new counter, with storage, accommodating the checkout and pick-up stations. The space behind the counter will be left free to accommodate pallets for storing books during busy periods. Installation of a new marmoleum floor finish. Installation of a new exterior double door Work schedule The Contractor undertakes to take all the necessary measures in order to respect the schedule set to start the work on or around 2021-02-03 allowing the issuance of the final Acceptance Certificate no later than: 2021-05 -28. . Penalties for delay : $ 1,000.00 / day. Performance bond and materials and services of each corresponding 50% is required.