Renovation of a residential development in Minneapolis, Minnesota. Completed plans call for the renovation of a residential development.

Q/A Cutoff Date: 12/14/2020 Q/A Cutoff Time: 04:00 PM EST Service Locations. The Contractor shall perform services at 1314 North 44 th Avenue, Minneapolis, MN 55412. The MPHA anticipates a start date of May 3, 2021, and a Substantial Completion date of July 30, 2021. 20% minority-owned business enterprises (MBE), 7% woman-owned enterprises (WBE), and 10% for Section 3 businesses Supply all labor, transportation, materials, apparatus and tools necessary for the entire proper completion of this Work; install, maintain and remove all equipment for the proper execution of this Contract; be responsible for the safe, proper and lawful performance of equipment, maintenance and use of the same; and perform in the best manner, and everything properly incidental thereto, as stated in the Contract Documents or reasonably implied therein. 1. Demolition: a. Remove existing roofing materials down to the deck. b. Remove obsolete penetrations and cover openings/provide deck infill at locations shown on the Drawings. 2. Wood Blockings: a. Replace existing roof-related wood blocking slated for reuse if it contains more than 19 percent moisture, shows evidence of rotting, or is otherwise in a condition that provides an unsuitable substrate to receive new materials. Include 1,000 board feet of wood blocking replacement in the bid. 3. Insulation Systems: a. Areas A1, A2, A3, A4, C1: Install three layers of isocyanurate insulation (2", 2", and 1" thick) and 1/2" high-density insulation cover board. All layers are to be set in low rise foam adhesive. b. Area C2: Install three layers of isocyanurate insulation (2", 2", and 1.5" thick) and 1/2" gypsum cover board. All layers are to be set in low rise foam adhesive. c. Area A5: Install 1/8"/ft. tapered isocyanurate (5" to 9.5" thick), followed by 1/2" high-density isocyanurate insulation cover board. All layers are to be set in low rise foam adhesive. d. Areas B1, B2, B3: Install 1/4"/ft. tapered isocyanurate (3.5" to 5" thick), followed by 1/2" high-density isocyanurate insulation cover board. All layers are to be set in low rise foam adhesive. 4. Membrane and Flashings: a. Install a 60-mil fully-adhered EPDM membrane and elastomeric flashings on all roof areas. b. Provide new walkway pads at access ladder and roof hatch locations. 5. Sheet Metal Flashings: a. Install color-coated galvanized steel flashings at the details