Renovation of a water / sewer project in Port St Joe, Florida. Completed plans call for the renovation of a water / sewer project.

**As of February 11, 2021, the project is in process. Surface Water Treatment Plant Clarifiers #1 and #2 Interior Renovation and Repaint. For questions concerning this Bid, please contact Surface Water Treatment Plant Superintendent Larry McClamma at 850-229-1421. The City of Port St. Joe reserves the right to accept or reject any and all Statements of Bids in whole or in part, to waive informalities in the process, to obtain new Statements of Bids, or to postpone the opening pursuant to the Citys purchasing policies. Each Statement of Bid shall be valid to the City of Port St. Joe for a period of sixty (60) days after the opening. The City of Port St. Joe is an Equal Opportunity, Affirmative Action, Drug Free Work Place Employer. Interior renovation and repaint of Clarifier's 1 and 2. Surface Preparation: Once covered and inspected by plant operator, ALL interior areas will be sandblasted to a SSCP-10 near white finish. All bare metal will be primed DAILY with Tnemec Series 91 H2O Hydro Zinc approved epoxy to prevent any new rust from forming. Once all sandblasting and priming is complete, all dust and sand must be vacuumed out and the tank must be washed thoroughly before any painting is to be done Install 24" manways to each clarifier. Dimensions: Height-16'4", Circumference-138' Prime: Tnemec Series 91 H2O Hydro Zinc NSF Approved Delft Blue. Intermediate Coat: Tnemec Pota-Pox Series 20HS NSF Approved Beige at 6-8 mils dft. Final Coat: Tnemec Pota-Pox Series 20HS NSF Approved White at 6-8 mils dft. renovation and repaint ofthe catwalks to Clarifier's 1 and 2. Surface Preparation: The top, bottom, and sides of the catwalk will be completely sandblasted to a SSCP-10 near white meta Prime: Tnemec Series 91 H2O Hydro Zinc NSF Approved Delft Blue. Intermediate Coat: Top and Sides-Tnemec Pota-Pox Series 20HS NSF Approved White at 6-8 mils dft. Bottom-Beige. Final Coat: Top and Sides-Tnemec Endura-Shield Series 73 Urethane Delft Blue at 6-8 mils dft. Bottom-Tnemec Pota-Pox Series 20HS NSF Approved White at 6-8 mils dft.