Renovation of an educational facility in Charlotte, North Carolina. Completed plans call for the renovation of a educational facility.

This project will replace the 550-ton chiller, replace the chilled water pumps in the McEniry building, the secondary water pumps in all buildings supported by the plant and upgrade the building automation system. The project will also install a new owner provided VFD for energy use reduction on the existing tower and pumps. In addition, this project will replace the existing transformer, replace the transfer switch, replace the existing panels, upgrade the emergency power distribution system, provide fire pump connections. In order to offer architectural or engineering services in response to this solicitation, the proposer must be licensed in the State of North Carolina. The scope of the project is to replace an existing pad-mounted medium voltage transformer, switchboard, and generator that feed the McEniry building, McMillian Greenhouse, and Storage Building. The new equipment will be set and made operational, the loads will be moved over one by one, and then the existing equipment will be demolished to limit downtime. The project is divided into multiple phases and outages will be closely coordinated with the University. The scope of the project is primarily exterior work and some of the work will require subcontractors. The equipment to be demolished includes a boiler and associated building, a generator and associated building, a portion of retaining wall and dirt, a standalone generator, a pad-mounted medium voltage transformer, a switchboard, panelboards, automatic transfer switches, and various feeders, boxes, and circuitry. The new equipment includes a pad-mounted medium voltage switchboard, an exterior switchboard, a generator, a generator docking station, automatic transfer switches, panelboards, concrete-encased ductbanks, handholes, a retaining wall, and various feeders, boxes, and circuitry. Additionally, electrical and plumbing support for a separate project is in the scope of this project, and the work in this project will need to be coordinated with that project. The scope of the other project includes replacing an existing chiller in place with new and replacing (2) existing VFD's cooling tower fans in place with new SCO ID #20-22572-01A