Site work, paving and new construction of a mixed-use development in Liberty, Kentucky. Completed plans call for the construction of a 8,000-square-foot pre-engineered storage facility; for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

The project is to be a new maintenance garage for the Kentucky Transportation Cabinet, District 8. The building will be an 8,000 square feet pre-engineered metal building with metal wall and roof panels and a thermal insulation/liner system. The structural system consists of a pre-engineered steel frame skeleton with conventional poured in place concrete shallow foundations, piers, grade beams and concrete floor slabs. The building layout consists of a 6,000 sf vehicle area with two vehicle bays, and a 2,000 sf support area containing offices, toilets, shower, break room and storage. Interior partitions will be light gauge steel framing with gypsum board surface and sound batt insulation. Occupied support spaces will have exposed concrete flooring and acoustic panel ceilings. Pedestrian doors will be hollow metal, windows will be aluminum framed with insulating glass. Vehicle doors will be by Owner. Site work consists of excavation and engineered fill for the building pad, minimal sidewalks, and parking and asphalt paving. Site furnishings include signage and flagpole. Water service shall be from municipal system, sanitary will gravity flow to municipal system. The building will utilize natural gas for heat. HVAC for occupied support spaces will be a packaged horizontal HVAC unit. Vehicle bays will be heated with gas unit heaters and ventilated with exhaust fans. Electrical work includes a 120/240V power distribution system and LED lighting. Communications systems will include telephone and data wiring and devices. Estimated Length of Project: 270 (Substantial Completion) + 30 (Final Completion) All bids shall be accompanied by a bid guarantee (in the form of a bid bond or certified check) of not less than five (5%) percent of the amount of the lump sum base bid. A 100% Performance Bond and a separate 100% Payment Bond shall be furnished by the successful bidder. All bonding and insurance requirements are contained in the Instructions to Bidders and/or General Conditions. Bonds should be executed by a surety company authorized to do business in the Commonwealth of Kentucky. The Division of Engineering and Contract Administration, Commonwealth of Kentucky, reserves the right to reject any and all bids and to waive all informalities and/or technicalities where the best interest of the Commonwealth may be served.