Contractor Qualification DCAMM Certificate Makeup Air Unit Replacement for Stoughton District Court. DCAMM certification Prime Contractor: HVAC. Each bidder shall visit the site of work and fully acquaint themselves with existing conditions and
ascertain pertinent local conditions readily determined by inspection and inquiry, such as the location,
accessibility, and travel routes throughout the site, Contract Documents, Plans and Specifications shall
not relieve him from the obligations incurred by him if his bid is accepted
A The work described herein shall be interpreted as work to be done by the
Heating Contractor and shall be known as the Mechanical Contractor or
Prime Contractor.
B. The scope of the work shall include the work for this entire project as
indicated on the Drawings and/or specified in these Specifications. It is
the responsibility of the Mechanical Contractor to interpret, from the
Drawings, which item belongs to which component of the various systems
and/or part thereof. This includes all required to provide all Subcontractors
and the work of other Sections pertaining to same.
C. Provide all necessary and required labor, materials and equipment,
incidentals, etc. necessary to complete the work of this Section 15500
(and other Sections), and without limiting the generality thereof includes
but not necessarily in this order
Removal of existing packaged gas fired rooftop makeup air
units tagged as RTU-1 and RTU-2 in their entirety
Removal of existing supply air supply duct from RTU-1 and
RTU-2-unit discharge to associated existing penetration of
roof.
Removal of existing RTU-1 and RTU-2 automatic
temperature controls
w. Any and all other no longer to be used or abandoned
equipment associated with RTU-1 and RTU-2
v. Complete rigging and installation of new packaged gas fired
rooftop makeup air units tagged as MAU-1 and MAU-2 as
shown on the mechanical plans
iv. Complete rigging, installation, insulation jacketing and
connection of new supply air ductwork from MAU-1 and
MAU-2-unit discharge to associated existing penetration of
roof,
v. Complete installation and integration of new MAU-1 and
MAU-2 automatic temperature controls
iv. Any and all other material and equipment necessary for
installation and operation of all new equipment installed
under this scope of work
.webp)
