The Design Build project is to design and install a new fire sprinkler system(s) service, smoke evacuation system, and integrate systems with fire alarm control panels for Building No. 4 (88,856 S.F.) located at W. 4th Street and Building No. 6 (70,180 S.F.) located on W. Third Street on Sinclair's Downtown Dayton Campus, Ohio. The two buildings have a basement and three story atriums that are open from first floor to roof covered with day lights. Except basements, these two buildings currently have no fire sprinkler systems. During construction, the Design Build team shall maintain egress at all times and protect the occupants. Buildings will be occupied. Work to be predominately performed Third Shift/Off Hours and breaks. Minor scope of work may be performed First/Second Shifts as coordinated with Owner. Contractor shall minimize/prevent any disruption to students, faculty, visitors, guests and staff. Most furniture, computers, phones, contents, etc. will remain in place and shall be completely protected by Contractor from damage, dust, etc. Some selected furniture, computers, phones, contents, etc. may be relocated as requested by Contractor and approved by Owner. New piping must be enclosed in new or existing aesthetic chases or soffits wherever possible and in public spaces or high- profile spaces. New construction shall meet Sinclair standards and preserve the existing aesthetic architectural historical significance that were designed by famed architect Edward Durell Stone. Some piping may be left exposed in classrooms or offices where open-to-structure coffer ceilings are present, in which case the piping will be painted to match and shall run in line with building structural lines. All spaces with suspended acoustical tile ceilings will have the piping concealed above the ceiling. New pump rooms or riser rooms may need to be built. New 200 KW backup generator and stepped ATS are to be provided and installed. The Design Build Team is responsible to look for any potential hazardous materials. The Program of Requirements ("POR") and the Schematic Design will be developed as a part of this project by the Criteria Architect/Engineer ("Criteria A/E"). All aspects of the project and related issues will be implemented and operated consistent with Owner's policies and procedures. Total Project Cost $1,600,000 Submit all questions regarding this RFQ in writing to rfp@sinclair.edu with the project number included in the subject line (no phone calls please). Questions are due on December 8th, 2021 by 2:00 p.m. EST. They will be answered via an addendum
.webp)
