Renovation of a water / sewer project in Naples, Florida. Completed plans call for the renovation of a water / sewer project.

The construction of the NCWRF EQ #3 Odor Control Improvements Phase 1 Construction Project located in Collier County, Florida. 1. Furnishing of all labor, material, superintendence, plant, power, light, heat, fuel, water, tools, appliances, equipment, supplies, services and other means of construction necessary for: removing existing odor control equipment and associated piping, conduit, wiring, fiberglass reinforce plastic (FRP) air ducts, existing concrete pad(s), and cutting and capping existing services; installing new odor control equipment consisting of a RJV-1128 V-Bank Carbon Scrubber with 75 hp duty fan and exhaust stack; installing and connecting all process drains including duct and fan drains; installing new 42-inch FRP duct; connections to existing ducts, installing vehicular guard posts; forming and placing concrete for concrete pads and duct supports; installing all necessary raceways, junction boxes, wires, grounding, lightning protection, etc. for power distribution and instrumentation and control devices, sensors, transmitters and wiring; PLC hardware modifications; site improvements and restoration necessary to complete the Work as intended and in accordance with the Contract Document requirements. 2. Procurement of all permits and payment of all permitting fees that may be required for completion of the work, unless noted otherwise. 3. Sole responsibility for adequacy of plant and equipment. 4. Maintaining the Work area and site in a clean and acceptable manner. 5. Maintaining existing facilities in service at all times. 6. Protection of finished and unfinished Work. 7. Repair and restoration of Work or existing facilities damaged during construction. 8. Furnishing as necessary proper equipment and machinery, of a sufficient capacity, to facilitate the Work and to handle all emergencies normally encountered in Work of this character. 9. Furnishing, installing, and protecting all necessary guides, track rails, bearing plates, anchor and attachment bolts, and all other appurtenances needed for the installation of the devices included in the equipment specified. Make anchor bolts of appropriate size, strength and material for the purpose intended. Furnish substantial templates and shop drawings for installation. The anticipated project budget is: $815,000.