Site work and renovation of a municipal facility in Etobicoke, Ontario. Completed plans call for site work for a municipal facility; and for the renovation of a municipal facility.

- De-energize existing motor pump P1&P2 feeding the master fuel tank MT1 & MT2 by turning in off position the circuit breakers located in panel EPP-5. Trace circuits as requires. Log and tag as per safety procedures. Coordinate the power shut down with CBRE-FM. - Temporary disconnect the power supply feeding the motor pump P1&P2. Make the wiring safe for future use. - Temporary disconnect and protect the control wiring from the fuel management control panel. Make the wiring safe for future use.(By Div.15) - Temporary disconnect and protect the grounding system from the master fuel tank MT2. - Temporary disconnect and remove the conduit and wiring mounted overhead on the structural support frame. - Disconnect, remove and protect the existing metal structure mounted overhead above the fuel tank MT1 and MT2. (By Structural) - Disconnect and remove the master fuel tank MT2 from site. Dispose of site as per disposal procedures. (By Div.15) - Supply and install new master fuel tank MT2, as the same location. Reconnect existing overhead metal structure, grounding system and the motor pump P1&P2. Refer to the construction notes and specification on the electrical, mechanical and structural drawings. - Provide temporary lighting an power during the constitution work. *Award amount was not released for publication. Value Range: $100,001 over