**As of Aug 3, 2021 the project has not yet been awarded. A timeline for award has not yet been established.** The City of Santa Fe reserves the right to reject any and all Bids, to waive any and all non-substantial irregularity in Bids received, whenever such waiver or rejection is in the best interest of the City of Santa Fe. The Bidding Documents and subsequent Work Orders contain a time for completion of the Work by the successful Bidder, and further imposes liquidated damages for failure to comply with that time. The Work is designated as the Runway 02 Runway Safety Area (RSA) Grading Improvements and consists of, but is not limited to: furnishing all equipment, labor and materials for the excavation, embankment, earthwork grading and removal and replacement of an electrical power service to the Glide Slope Antenna, all as required to replace water distribution, water storage, and water supply infrastructure, in accordance with the Drawings, Specifications, and other Contract Documents. Contractor shall be responsible for adherence to the Contract Documents, Construction Documents, Specifications and approved directives. Contractor shall be responsible for State CID requirements and permit. Contractor shall be responsible for verifications of all existing conditions, measurements and dimensions for each executed Work Order. Contractor shall be responsible for all permits, fees, and State and/or City inspections associated with the construction. Contractor shall be responsible for removal and securing of any existing infrastructure elements, equipment, signage, fencing, etc. necessary to provide for the new work in accordance with the contract documents and to re-install these items in proper working condition All questions shall be submitted in writing, either at the time of the Pre-Bid Conference or by e-mail as stipulated in the Instructions to Bidders (ITB). Responses to questions will be issued by Addenda. Attendance at the Pre-Bid Conference is required, and a pre-requisite for submission of a Bid.
Due to the COVID-19 Pandemic, there will be no public Bid Opening The Work is designated as the Runway 02 Runway Safety Area (RSA) Grading Improvements and consists of, but is not limited to: furnishing all equipment, labor and materials for the excavation, embankment, earthwork grading and removal and replacement of an electrical power service to the Glide Slope Antenna, all as required to replace water distribution, water storage, and water supply infrastructure, in accordance with the Drawings, Specifications, and other Contract Documents The Contractor shall perform the following work:
Runway 02 Runway Safety Area (RSA) Grading Improvements to include approximately 50,000 cubic yards of excavation and embankment and cable cut / splice of a primary power feed to the Glide Slope Antenna. DEADLINE FOR PRE-BID RFI: Friday, June 11, 2021
.webp)
