Renovation of a fire / police facility in Biddeford, Maine. Completed plans call for the renovation of a fire / police facility.

THE CITY OF BIDDEFORD is seeking sealed proposals for design build services to demo and renovate existing Dorm Rooms at the Biddeford Central Fire Station 152 Alfred Street, Biddeford Maine, 04005. The following specifications is intended to be a brief guide to the general requirements, and materials, proposed for this project, and are offered primarily for bidding purposes. Bidders are responsible for ensuring proposals are complete. The project focuses on demo and renovations to existing Dorm Rooms on the second floor living quarters. The Central Fire Station built in 1990, and designed to accommodate five dorm rooms for sleeping quarters and accommodate two firefighters per dorm room as per the attached concept plan- Floor Plan Dorm Room Additions Central Station. The main objective is to renovate the existing square footage of the dorm rooms and divide the rooms to accommodate individual sleeping quarters. A performance bond of 10% of the total cost of the project will be required from the contractor awarded the bid. The scope of provided below is a general summary. The actual plans and specifications comprise the scope of work. Ancillary tasks not specifically identified but required to complete the project as designed will be considered a part of the scope of work and will not constitute the basis for a price increase unless specifically identified with the proposal submittal and agreed upon to formal award. Demo existing partition walls, heating, HVAC, electrical fixtures, fire sprinkler heads, fire alarm notification devices, as needed and install with new. Any existing material capable of being re-used, must be specified in the bid spec. Frame new walls and ready for mechanicals. Install drywall, prime and paint two coats on walls. Install and add new solid core composite doors with new hardware and trim, prime and paint with two coats of paint. Remove existing suspended ceiling as needed and replace new suspended ceiling to match as close as possible to existing tiles. Remove existing VCT flooring and install with new VCT flooring in disturbed areas. Relocate existing HVAC duct work and provide additional HVAC duct to new areas where needed. Install rough and finish electrical to meet code with MC, and relocate or add additional matching ceiling light fixtures where needed. Lighting to be wired to current house lights and activate with in house emergency tone. Remove and relocate existing fire alarm horns and smoke alarms, add new horns and smokes where needed to meet NFPA 72 and 70 fire alarm and electrical code. Remove and relocate existing fire sprinkler heads as needed and install new additional fire sprinkler heads where needed to meet the current NFPA 13 fire sprinkler code. Contractor shall ensure that work is performed in a safe and workman like manner at all times and incorporates all elements of the 20160121 IAQ Construction Control Guide rev 2, attached.