Renovation of a municipal facility in Tacoma, Washington. Completed plans call for the renovation of a 24,000-square-foot municipal facility.

**As of Sept. 27, 2021, the project was awarded to Good News Group. Scope of Work: The Work required for this Project includes: the removal and disposal of approximately 24,000 sqft of existing SPF coated metal roof panels and adjacent metal fascia panels and replace with new metal roof and fascia panels; installation of new gutters, downspouts, fall protection and bird deterrent systems; temporary support and minor modification of mechanical; temporary support of other utilities located on the roof; and relocation of access door and exhaust vents Bid Estimate: Estimated cost range is $1,552,000 to $1,716,000, plus Washington State Sales Tax (WSST). In accordance with RCW 39.04.320, fifteen (15) percent apprenticeship participation is required for certain projects estimated to cost one million ($1,000,000) dollars or more. Bidders may contact the Department of Labor and Industries, Speciality Compliance Services Division, Apprenticeship Section, P.O, Box 44530, Olympia, WA 98504-4530, by phone (360) 902-5320, or e-mail at Apprentice@lni.wa.gov, to obtain information on available apprenticeship programs Bid Security: Each Bid must be accompanied by a Bid security in an amount equal to five (5) percent of the Base Bid in a form allowed by the Instructions to Bidders Bid Security: A Bid Security Bond is not required for this project. Contact Information: Any questions to the Port may be emailed to procurement@portoftacoma.com. No oral responses will be binding by the Port. Questions will not be accepted after seven (7) days prior to the Bid Date Contact procurement@portoftacoma.com with questions The Work of this item includes all administrative costs associated with administering and supervising the project including, but not limited to supervision of personnel, coordination of all work activities, coordination of subcontractors and/or suppliers, preparation and transmittal of submittals, permit acquisitions, for premiums on bonds and insurance for the project, and project overhead. Remove and replace approximately 24,000sqft of existing SPF coated metal roof panels and adjacent metal fascia panels. Existing underlayment and rigid insulation to remain where occurs, roof and wall cavities will not be exposed. New work to include replacement metal roof and fascia panels, fall protection, and bird deterrent system. Remove and replace approximately 24,000sqft of existing SPF coated metal roof panels and adjacent metal fascia panels. Existing underlayment and rigid insulation to remain where occurs. The Work includes the requirements to provide air and noise control measures until Final Completion of the Work. The Work shall consist of planning, installing, inspecting, maintaining and removing Temporary Erosion and Sediment Control (TESC) Best Management Practices (BMPs) to prevent pollution of air and water; and to control, respond to, and dispose of eroded sediment and turbid water during the term of the Contract.