Site work and new construction of a pre-engineered storage facility in Egg Harbor Township, New Jersey. Completed plans call for the construction of a pre-engineered storage facility; and for site work for a pre-engineered storage facility.

NOTE: It is the bidder responsibility to ensure that the bid package is delivered by the bid opening date and time. Any bid document received after the deadline established by the Department of Purchasing will not be accepted, regardless of the method of delivery. Submission of Bid: All bids must be submitted on the bid proposal forms approved and provided for by the bid specifications in order to be considered. Bidders are to provide one (1) clearly sealed and marked ORIGINAL, one (1) clearly marked COPY and one electronic copy on CD/ Flash drive. If indicated, bid proposals must be accompanied by a certified check, cashiers check, or bid bond in the amount of ten per centum (10%) of the total amount of the bid, but not in excess of twenty thousand ($20,000) dollars and made payable to the Township of Egg Harbor. The bid bond may also be provided in certified check and cashiers check in accord with provisions within general requirements of this bid. The Township of Egg Harbor does not release the project estimate. Bidders are required to comply with the requirements of N.J.S.A.10:5-31 et seq. and N.J.A.C. 17:27. This bid has been advertised in accordance with the Fair and Open Basis and nothing further shall be required under the Pay-to-Play Legislation (N.J.S.A. 19:44A-20.5). SCOPE The Public Works Department is seeking bids for the supplying of materials, labor and tools for the construction of a Pole Barn structure. The building will be constructed at the public works facility located at: 6120 Mill Road, Egg Harbor Township NJ 08234. The building will be utilized as a storage facility and workshop for the Buildings and Grounds Divisions. The specifications pertain to the building only. All site preparation will be completed by township personnel EXCEPTIONS TO SCOPE This specification does not include any concrete or electrical work. DESCRIPTION OF WORK The following is a general description of the dimensions and materials to be utilized for the constructions of the building. The specifications are intended to be informative; they are not assumed to be exhaustive. Any and all materials, techniques or other actions required to complete the building must be included in the bid whether specified or not. Permits and inspection scheduling is the responsibility of the contractor. Trash will be disposed of by the Township. POLE BARN SPECIFICATIONS Dimensions of proposed building: 50FT Wide x 65FT Long x 16FT (inside ceiling height) 3 PLY 2 X 6 glue-laminated, poles 8FT on center. Siding: 28 Gauge Panel 50 Year warranty. Roofing: 27 Gauge panel 50 Year warranty. Standard trusses, 4 FT on center, 4/12 pitch, Snow load by code DOORS: Two (2), Two (2) 14x14 Commercial micro-grooved insulated garage doors with windows built in. One (1) Entry door 3068 Outswing fiberglass insulated with window. Two (2) Entry door 3068 Outswing fiberglass insulated without window. All doors to have panic hardware with auto closure. OVERHANGS: One (1) FT overhangs on gable ends and eaves. Miscellaneous: 2 X 6 Skirt board treated with barrier tape. One (1) inch thick roof insulation. Double bubble roof vapor barrier. Ridge vent top of roof. Engineered sealed blueprints