Site work and paving for a mixed-use development in Lincoln Park, New Jersey. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; sidewalk / parking lot; and water / sewer project.

Budget is $550K-$600K The project limits include: the entire lengths of Sherbrooke Drive; Surrey Road; Eugene Circle; and, the length of Fidelian Way from Jacksonville Road to the municipal boundary with the Township of Montville. The total project length is approximately 6,473 linear feet (1.226 miles). The scope of work includes, but is not limited to: resetting existing manholes; resetting storm inlets including new NJDEP castings; construction of new ADA curbs ramps; asphalt milling and road resurfacing; replacement of traffic control signs; and, traffic striping. The main items of construction and approximate quantities include, but are not necessarily limited to: 26,100 square yards of asphalt milling; 3400 tons of hot mixed asphalt surface course, two (2") inches thick, mix 9.5 M64; reset of fifty-six (56) precast concrete storm inlets including new castings; 1,150 linear feet of granite block curbs; 180 square yards of four (4') foot wide Portland cement concrete sidewalks, four (4") inches thick; 45 square yards of Portland cement concrete sidewalk, six (6") inches thick with reinforcement; and, installation of fourteen (14) square yards of ADA detectable warning surfaces. Bids must be made on the included standard proposal forms in the manner designated therein and required by the Specifications, and must be submitted in a sealed envelope, clearly marked with the project identification and the name and address of the Bidder. Bids may be submitted by certified mail, return receipt requested, regular mail or hand delivery. Bids shall be submitted to the Office of the Lincoln Park Administrator, located at 34 Chapel Hill Road, Lincoln Park, New Jersey 07035. The Borough of Lincoln Park is not responsible for any bid mailed or hand delivered which is lost in transit or delivered late. A bid may be withdrawn prior to the time for opening of bids or authorized postponement thereof upon written application of the Bidder who shall be required to produce evidence showing that individual is or represents the principal or principals involved in the bid. No bid may be withdrawn for a period of sixty (60) days after bids have been opened. For Federal Express requests, Bidder must provide a check in the amount of $85.00 plus their Federal Express account number. One (1) set of Plans, Contract Documents and Specifications are on file for review by the public at the office of the Lincoln Park Borough Administrator, located at 34 Chapel Hill Road, Lincoln Park, New Jersey 07035, during their normal business hours. The Bidder shall submit only one (1) bid that meets or exceeds the minimum specifications herewith. All bids must be signed. Failure to do so shall cause the bid to be nonresponsive and rejected. Each bid shall be accompanied by a Guarantee in an amount of the lesser of ten percent (10%) of the total bid price or Twenty Thousand Dollars ($20,000.00), in the form of a certified check or cashier's check payable to the Borough or a Bid Bond issued by a Surety authorized to transact business in New Jersey and found acceptable by the Borough. Each bid must also be accompanied by the consent of a similarly acceptable Surety, guaranteeing a one hundred percent (100%) Performance Bond and a one hundred percent (100%) Labor and Material Payment Bond will be furnished upon award of the Contract. Bidders are required to comply with the Equal Employment Opportunity Requirements of N.J.S.A. 10:5 31 et seq. and the Affirmative Action Requirements of N.J.A.C. 17:27. Bidders are also required to comply with Chapter 150 of P.L. 1963 and the prevailing wage regulations promulgated thereunder. Simultaneously to bid submission, a Bidder must submit a Corporate Ownership Disclosure Statement in accordance with c.33, P.L. 1977. Failure to submit a Corporate Ownership Disclosure Statement with the bid shall result in the rejection of the bid pursuant to N.J.S.A. 40A:11 23.2. Each Bidder must also complete the Non Collusion Affidavit contained in the Bid package. Bidders are required to comply with the requirements of the Local Public Contracts Law under N.J.S.A. 40A:11 1, et seq. Bidders are also required to comply with the Public Works Contractor Registration Act (N.J.S.A. 34:11 56.48, et seq.) which requires all contractors, subcontractors, or lower tier subcontractors (including subcontractors listed in bid proposals) who bid on or engage in the performance of any public work register with the New Jersey Department of Labor and Workforce Development. If perspective bidder makes a formal request and payment for bid documents, then perspective bidder is placed on the list of bidders and will be notified of all amendments and changes to the bid documents. However, if perspective bidder obtains bid documents pursuant to the Open Public Records Act, perspective bidder will not be on the list of bidders and will not be provided with notice of any amendments or changes to the bid documents. All business organizations doing business with a local contracting agency are required to be registered with the State of New Jersey prior to submitting bid proposals. Proof of registration shall be provided to the contracting agency for all Contractors and Subcontractors before the contracting agency may enter into a contract with the business. Contracts awarded after September 1, 2004, must comply with this requirement. If for any reason the Contract is not awarded, refunds will immediately be returned to bidders pursuant to N.J.S.A. 40A:11 24(b) when the Contract documents are returned in reasonable condition within 90 days of notice that the Contract has not been awarded. The Borough reserves the right to reject any or all bids, to waive any informalities, deviations or omissions in any or all bids, and to accept such bids and make awards as may be most advantageous to the Borough. All bids must conform to the models and directions contained in the Specifications.