This is a service / maintenance or supply contract in Spindale, North Carolina. Contact the soliciting agency for additional information.

For Bid is to obtain pricing from Vendors to furnish and deliver Treated Lumber for Bridge maintenance to the NC Department of Transportation. Lumber for bridges that is 2 inches to 4 inches thick and 2 inches to 4 inches wide shall conform to Structural Light Framing, Grade No. 1 Dense. Lumber for bridges that is 2 inches to 4 inches thick and 6 inches wide and wider shall conform to Structural Joists and Planks, Grade No. 1 Dense. Lumber for bridges that is 5 inches and thicker along the least dimension shall conform to Structural Lumber, #1 Dense or Dense Select Structural (DSS). Lumber for fender systems shall conform to Structural Lumber, #1 Dense or Dense Select Structural (DSS). Timber for piles shall meet ASTM D25 except that the timber shall be Southern Pine and have at least a 2 inches sap ring or a 3 inches sap ring were called for by the contract or where the preservative is creosote, and the retention is greater than 18 lbs./cf. Rough lumber will be acceptable except where surfacing is called for by the contract or bills of material. Rough lumber may vary +- 1/4 inch from the dimensions shown in the plans or bill of material. Dressed lumber may be 1/8 inch 1 scant from the dimensions shown in the plans or bill of material. A 1/4- inch tolerance in length will be permitted. Submit Written Questions October 5, 2021, @ 12:00pm ET The State reserves the unqualified right to reject any and all offers at any time if such rejection is deemed to be in the best interest of the State