Site work and paving for a mixed-use development in Kansas City, Missouri. Completed plans call for site work for a road / highway; and for paving for a road / highway.

As of 11/30/2021 This project has not been awarded. City desires that Minority Business Enterprises (MBE) and Womens Business Enterprises (WBE) have a maximum opportunity to participate in the performance of City contracts. The goals for this specific Project are (14%) MBE participation and (12%) WBE participation. Shall include a summary of the Work included in the WCD. Additional information may be attached to the WCD to further define the scope. Will identify clearly if the Work included in the WCD is an addition, deletion, revision, or some combination. These specifications cover the furnishing, boring, drilling, pumping cementatious grout slurry and appurtenances for raising existing concrete slabs to their original lines and grade, or filling the void between the bottom of the existing concrete slab and the subgrade. The work described in each Item includes the furnishing of all materials, equipment, supplies, tools, the performance of all labor and services, and all incidentals necessary to complete the concrete slab raising and / or void filling under the concrete slab in a neat, substantial and workman-like manner. These specifications cover the grinding and cleanup for grinding concrete sidewalk, driveway, and curb to remove trip hazards. The work described in each Item includes the furnishing of all materials, equipment, supplies, tools, the performance of all labor and services, and all incidentals necessary to complete the grinding in a neat, substantial and workman-like manner. Perform grinding using dry, vertical carbide grinding equipment that will leave a non-slip surface. Grinding can also be performed by saw cutting with flush mounted diamond tipped blades capable of horizontal cutting to remove the concrete completely to all edges of the w. Perform grinding so that the surface has essentially the same texture adjacent to either side of the joint or crack. Ground surfaces will not be smooth or polished and have a coefficient of friction of not less than 0.30. Perform grinding so that the finished grind has a rectangular appearance consisting of a straight back line with no stray grinding marks. The adjacent concrete will remain untouched by the grinding process without scars or damage. The finished slope will be a maximum of 8.3% per attached details. All dust and debris from the grinding process shall be contained to the work area during the grinding operation and then immediately removed once the grinding is complete at that location.