Renovation of a mixed-use development in Pittsville, Wisconsin. Completed plans call for the renovation of a educational facility.

The Pittsville School District (District) invites contractors to submit proposals (two separate projects) to furnish air conditioning addition and needlepoint bipolar ionization. The duration of each contract will be January 20, 2022 through June 3, 2022. Contact Information Dan Giles, Facility Manager 715-884-5217 gilesdan@pittsville.k12.wi.us Intent: Install needlepoint bipolar ionization to all heating/cooling air handling systems in the District that currently do not have it. Integrate with existing controls and all electronics. Installation of needlepoint bipolar ionization (BPI) to improve the air quality in the District buildings. Scope of work: Installing BPI in all: Administration building - heating and cooling units and air handling units Elementary building - primary wing - heating and cooling units and air handling units Elementary building - 7/8 wing and 4/5/6 wing - heating and cooling units and air handling units High School building - heating and cooling units and air handling units All high and low voltage wiring and integrating with current control system Details for Scope of work: High School - (44) Heat pumps: Provide and Install (1) GPS-FC48-AC unit for all the larger heat pumps in the high school (39) required. Provide and Install (1) GPS-FC-1 unit for all the smaller PTAC style heat pumps in the High school. (5) Required. All wiring included and test operation. Elem. School - AHU 1 & Junior high wing AHU- 1 & 2: Provide and Install (1) GPS I-Mod unit for AHU 1. (1) Required Provide and Install (2) GPS I-Mod unit for JH Wing AHU 1 & 2. (2) Required All wiring included and test operation. 4, 5, 6 wing & rooms 137,139, 127,125 & 123: Provide and Install (1) GPS FC-1 NBPR . (19) required VRF cassette Provide and Install (1) All wiring included and test operation. Make up Air unit in 4, 5, and 6 wing: Provide and Install 1 GPS I-Mod unit for Makeup air system (1) <2 rows> (1) Required. All wiring included and test operation. Admin- AHU 3, 4, 5, 6, 8, 9: Provide and Install (1) GPS I-Mod unit on all the units. (6) Required. All wiring and test operation. Admin - AHU 1, 2 & 7: Provide and Install (1) GPS I-Mod unit for AHU-1 & 2. (2) Required. Provide and Install (1) GPS I-Mod unit for AHU-7 <2 rows> (1) Required. Factory startup and all state and local permits provided by installer.