Site work and paving for a road / highway in North Fork, Idaho. Completed plans call for site work for a road / highway; and for paving for a road / highway.

This project consists of removing and patching asphalt edge cracking, removal of surface drains, placing a 2" asphalt overlay on approximately 7.5 miles of the roadway, and chip sealing approximately 9 miles of the roadway. The solicitation is set-aside for Small Businesses. This solicitation is anticipated to be issued on or after April 12, 2022. The anticipated start date is June 1, 2022. The period of performance for the project is 180 calendar days. In accordance with FAR 36.204, the estimated magnitude of construction for this project is between $1,000,000 and $5,000,000. Contractors are required to be actively registered with the System for Award Management (SAM) https://www.sam.gov prior to submitting a proposal and to be considered for award. Registering in the SAM system is FREE. If you need assistance, please be sure to reach out your local Procurement Technical Assistance Center (PTAC) representative. PTAC is a FREE resource to all small business and your state representative's contact information can be found at the following website: https://www.aptac-us.org/. All future information about this acquisition, including amendments, will be distributed solely through this site. Interested parties are responsible for monitoring this site to ensure that they have the most up-to-date information about this acquisition. Vendors are required to be registered in the System for Award Management (SAM). Point of Contact: Kellie Shaw, Contracting Officer, (p) 208-313-3852, (e) kellie.shaw@usda.gov Place of Contract Performance: Located in Valley County, Idaho *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. This project consists of removing and patching asphalt edge cracking, removal of surface drains, placing a 2" asphalt overlay on approximately 7.5 miles of the roadway, and chip sealing approximately 9 miles of the roadway. Work includes but is not limited to: cutting and removing damaged asphalt on road edge, cutting removing and backfilling existing surface drains, replacing asphalt removed from edge damage and surface drains, placing tack and 2" thick overlay consisting of 1/2 " asphalt, and placing a 1/2 " Chipseal.