Site work and paving for a road / highway in Texas City, Texas. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Scope of Work of the Contract includes construction of paving facilities Each Bid must be accompanied by a Bid Bond or a certified or cashier's check, acceptable to the Owner, in an amount not less than five percent (5%) of the total amount Bid, as a guarantee that the successful bidder will enter into the Contract and execute the Bonds on the forms provided, and provide the required insurance certificates within seven (7) days after the date Contract Documents are received by the Contractor. The Owner reserves the right to reject any or all Bids and to waive all defects and irregularities in bidding or bidding process except time of submitting a Bid. The Work. The work consists of providing the necessary labor, materials, equipment, supervision, and plant to construct Paving Facilities in Lago Mar Pod 8 Sec 2. The Project Site. The project is located in Galveston County Municipal Utility District No. 59. From the address of Jones & Carter, Inc. listed below, the site may be reached by taking US 59 N to I-45 S and take exit 17 (Holland Road). Continue on Frontage Road and turn right on Lago Mar Blvd. Follow Lago Mar Boulevard until you reach Lago Crossing, and take a left. Continue down Lago Crossing, then take Hughes Road South. The project site is located near the end of Hughes Road, on your right. Description Execute cutting (including excavating and backfilling), fitting or patching of the work required to: (1) Make several parts fit properly. (2) Uncover work to provide for installation of ill-timed work. (3) Remove and replace defective work. (4) Remove and replace work not conforming to requirements of the contract documents. (5) Remove samples of installed work as specified for testing. (6) Install specified work in existing construction. b. In addition to contract requirements, upon written instruction of the Engineer: (1) Uncover work to provide for observation of covered work. (2) Remove samples of installed materials for testing. (3) Remove work to provide for alteration of existing work. c. Do not endanger any work by cutting or altering the work or any part of it. d. Do not cut or alter the work of another Contractor without written consent by the Engineer. e. Prior to cutting which affects structural safety of the project, or the work of another Contractor, secure written approval by the Engineer.