Renovation of a swimming pool in Billings, Montana. Completed plans call for the renovation of a swimming pool.

Each bid must be accompanied by a Certified Check, Cashier's Check, or Bid Bond payable to the City of Billings, Montana, in an amount not less than ten percent (10%) of the total amount of the bid. Successful bidders shall also be required to furnish an approved Performance Bond and Labor and Materials Bond Payment Bond both in the amount of one hundred percent (100%) of the contract amount. The right is reserved to reject any or all bids received, to waive irregularities, to postpone the award of the contract for a period of not to exceed sixty (60) days, and to accept that bid which is in the best interests of the City of Billings, Montana. Actual work on the project shall commence on or after August 29, 2022, with completion expected no later than October 14, 2022. The scope of work of this project consists of the installation of a reinforced PVC membrane lining system specifically designed and formulated for use in swimming pools. This is to be installed after the existing PVC liner system has been removed and the pool tank surface cleaned and properly prepared. The Contractor shall furnish all labor, materials, equipment, appliances, service and perform the operations as detailed herein to complete the installation of the system in the Rose Park Pool. Since this is a remodel installation, it is the responsibility of the Contractor to locate termination, transition and splices to provide for an aesthetically pleasing and watertight project. Individual rolls of reinforced PVC membrane shall be custom fitted and welded together at the job site using hot air welding techniques. Upon completion, the system shall provide a waterproof, yet flexible membrane, complete with all necessary fittings, attachments, flange transitions and markings. This specification includes, but is not limited to, the following components: 1. Slip-resistant and regular reinforced flexible PVC membrane - "Renosys" PVC Pool Shell membrane as supplied by Aquatic Renovation Systems, Inc., Natatec Swimming Pool Membrane System as supplied by Natare Corporation, Sarnafil as manufactured by Sarnafil, Inc. or approved equivalent. 2. Separator fleece 3. PVC steel edging & sheets 4. Galvanized steel edging & sheets 5. Sanitizing agents 6. Transition flanges 7. Edge sealants 8. Adhesives 9. Wall and floor patching materials