Site work and paving for a civil project in Round Rock, Texas. Completed plans call for site work for a road / highway; for paving for a road / highway; water / sewer project; and water / sewer project.

PARKSIDE PENINSULA SECTIONS 1 & 2 STREET EXCAVATION & DRAINAGE, WATER, WASTEWATER AND EROSION CONTROL IMPROVEMENTS Sealed proposals, in duplicate, addressed to HM 2243 DEVELOPMENT, INC. ON BEHALF OF WILLIAMSON COUNTY MUNICIPAL UTILITY DISTRICT NO. 25 (WCMUD25), for the construc- tion of "PARKSIDE PENINSULA SECTIONS 1 & 2 - STREET EXCAVATION & DRAINAGE, WATER, WASTEWATER, AND EROSION CONTROL IMPROVEMENTS" in Williamson County, TX, No faxed bids will be accepted. Any proposals received after the closing time will be returned unopened. The bid is for all the Improvements for the project, which includes erosion controls and all labor, equipment, and other necessary appurtenances to construct the project. Bids must be submitted on the form included in the bid documents, in a sealed envelope marked "Bid for Parkside Peninsula Sections 1 & 2 -Street Excavation & Drainage, Water, Wastewater, and Erosion Control Improvements." Prospective bidders are required to submit Statements of Qualification no later than 5 calendar days prior to the scheduled bid opening. Qualification forms are included in the bid documents. Failure to submit the required Statement of Qualification as required will be sufficient cause to reject a contractor's bid. The bid package may also be examined without charge at the office of the engineer. Call Jenny Pollard at 512-836- 4793 regarding availability of the bid package. Bidders should carefully examine the plans, specifications, and other documents, visit the site of proposed work, and fully inform themselves as to all conditions and matters which can in any way affect the work or the cost thereof. Should a bidder find discrepancies in, or omissions from the plans, specifications, or other documents, or should be in doubt as to their meaning, the Engineer shall be notified, and clarification obtained prior to submitting any bid. A Cashier's Check or Certified Check upon a national or state bank must accompany the bid proposals as a guarantee that, if awarded the contract, the bidder will within ten (10) days of the award of the contract. The Bidder's Check or Bid Bond will be forfeited and become the property of the Owner should the bidder fail to enter into a contract and furnish bonds acceptable to the Owner within ten (10) days after award of the contract. The notice of award of contract shall be given by the Owner within sixty (60) days after the bid opening. The Bidder's Check or Bid Bond must be enclosed in the same envelope as the bid. Bids without a Bidder's Check or Bid Bond will not be considered. All bid securities will be returned to the respective bidders within seventy-two (72) hours after bids are opened, except the three most qualified bidders, which the Owner elects to hold until the successful bidder has executed the contract. Thereafter, all remaining securities, including security of the successful bidder after entering into a contract, will be returned within forty five (45) days of the notice of award. The contract price from an approved surety company holding a permit from the State of Texas to act a surety (and acceptable according to the latest list of companies holding certificates of authority from the Secretary or the Treas- ury of the United States) and having Best Key Rating Guide of A or better. No proposals shall be withdrawn for a period of sixty (60) days after the opening of the bids. The Owner reserves the right to reject any and/or all bids and to waive all formalities in the bidding process. The Owner also reserves the right to determine which bid is most advantageous, and to award the contract on this basis. Contractors must be plan holders/reviewers of record and must attend the mandatory pre-bid meeting to be eligible to submit a bid. A mandatory pre-bid conference will be held at 10:00 AM ON THE DATE OF DECEM- BER 8, 2021 at the office of Randall Jones & Associates Engineering, LLC.