Demolition, site work, renovation and addition to an educational facility in Port Jervis, New York. Completed plans call for the addition of a educational facility; and for the renovation of a educational facility.

Project Location: 118 East Main Street, Port Jervis, New York 12771. Bids shall be prepared as set forth in the Information to Bidders, enclosed in a sealed envelope bearing on its face the name, address and phone number of the bidder and the title of the project. Each bidder agrees to waive any claim it has or may have against the Owner, the Architect/Engineer, and the respective employees, arising out of or in connection with the administration, evaluation or recommendation of any bid. The Owner further reserves its right to disqualify bidders for any material failure to comply with the Information for Bidders and General, Supplementary, and Special Conditions. The Owner reserves the right to reject any or all bids and to waive any informalities or defects in such bid either before or after opening. Each bidder must deposit with his bid, security in the form and subject to the conditions provided in the "INFORMATION FOR BIDDERS". Attention of bidders is particularly called to the requirements as to conditions of employment to be observed and to the minimum wage rates to be paid under the Contract. No bidder may withdraw his bid within 45 business days after the date of the opening of bids. Work under this Contract may generally be described to include, but not be limited to the following: Procurement and general requirements; and all other work and related materials as indicated on the Contract Drawings, Multiple Contracts Summary, as specified herein, and as required for the complete and proper execution of the Work. This outline is a general indication of the requirements of this Contract and is not intended to be all inclusive. The complete Contract Documents in their entirety, to include any and all addenda, form the basis of the responsibility of this Contract. Each contractor is advised that the specification sections in Division 01 - General Requirements apply distinctly to each Prime Contractor and the balance of the technical specifications apply to each Contractor (as appropriate) for the accomplishment of his work. All work of this contract shall be coordinated with other Prime Contractors involved in the project. All work shall additionally be coordinated with all other activities, construction, or others at each site throughout the progress of the work of this project. The Contractor shall use all means possible and shall be responsible for coordinating the installation of all materials of this Contract with work of all other trades involved with this project. All work shall be done in strict accordance with the Contract Documents and in compliance with all applicable Local, State and Federal Codes. Prior to the Bid Date of this project, the Contractor shall be completely responsible for visiting the project site to become completely familiar with the scope of this project. Each bidder agrees to waive any claim it has or may have against the Owner, the Architect/Engineer, and the respective employees, arising out of or in connection with the administration, evaluation or recommendation of any bid. It shall be completely understood that the use of asbestos containing materials in this project is strictly forbidden and all materials are provided in accordance with the Federal Asbestos Hazard Emergency Response Act (AHERA), and the New York State Asbestos Safety Act (SASA). In addition to those items in the Base Bid, the Contractor shall further sub-divide his bid proposal as described in the following bid items, alternates, and/or unit prices. The Contractor shall include in the Base Bid all of the work of this Contract not specifically described in a Bid Item or Alternative. The Owner reserves the right to accept any and/or all of the Bid Items and/or Alternates or any combination thereof and to waive any informalities or defects in the bid proposals either before or after opening. BCA Project No. 2019-011 PH1 The Work of the Window Contract includes but is not limited to, the following descriptions: 1. Includes Architectural, Structural, Masonry, plus other construction operations traditionally recognized as Window Construction Work. This includes, but is not limited to, new and existing window replacement, new translucent panels, and all hazardous material abatement work shown relative to this work on the following: a. Drawings: 1)All "A500" series Drawings that pertain to the work of this contract. 2)All A800 series Drawings that pertain to the work of this contract. 3)"AA" series Drawings that pertain to the work of this contract. 2. Coordination: a. Coordination with the work of all the other contractors. b. Coordinate with GC Contract 1, to provide window openings for personnel entry and loading building materials. 3. Demolition: a. Remove all existing aluminum windows including all associated abatement of ACM panels. Remove all existing steel windows as ACM due to the plaster returns. Asbestos containing material removal and disposal will be per Code Rule 56. b. Provide openings for new windows as per the drawings and contract documents. c. Removal and disposal of miscellaneous equipment including equipment not shown if impacting work to be demolished. d. All cutting and patching necessary for work of this contract, including layout, sleeves, coring, debris removal, sawcuts, and providing lintels. 4. Temporary Facilities a. Provide critical barriers at all window removals. b. Provide continuous exits. c. Provide temporary shoring as required at new openings. d. Provide insulated weather-tight temporary protection at all openings not receiving new units. e. Provide Temporary Facilities indicated as Work of this Contract in Division 1 Section 01500, "Temporary Facilities and Controls" 5. New Construction: a. Provide new windows, screens, trims, operators, hardware and glazing as shown. b. Provide new lintels as per the drawings and contract documents. c. Provide new Fiberglass sandwich panels and their frames (Kalwall) d. Flashing and counter flashing for all penetrations. e. Provide all blocking and fascia work as shown. f. Provide rough and finish carpentry. g. Provide thermal and moisture protection.