Renovation of an educational facility in Houston, Texas. Completed plans call for the renovation of a educational facility.

HVAC Replacements for Coleman College. Engineer's estimated Project Budget: $975,000.00 to $1,125,000 Removal of Existing HVAC System Remove existing OAHU-R.01 with VFD, condensate piping, chill water supply and return piping, wiring and associated controls. Remove Fan Coil Units FCU-P.01, FCU-P02, and FCU-P.03 condensate piping, chill water supply and return piping, wiring and associated controls. Chill water as required both supply and return will be removed to isolation valves. Steam pipe piping to be removed and capped at the 4 th floor mechanical room. Remove the duct riser for OAHU - R-01. Remove the drywall at the shaft wall on the 5 th floor as required and reinstall the duct. Remove existing unit heater and associated controls Installation of New HVAC Equipment Install OAHU-R.01 with VFD, and associated piping, wiring and associated controls to ensure a complete system. Re-flash at the roof curb as required. Install Fan Coil Units per the contract documents. All associated piping, wiring, and controls to ensure a complete system. Install unit heaters per the contract documents associated wiring controls to ensure a complete system. Clean all duct, grills and equipment. Coordination with test and balance and commissioning is required. Touch up finishes if needed and do a final clean of the building and equipment to ensure it is ready for use. Install new controls using (Schneider Electric Ecostuxture System upgrade). Ensure electrical panels are labeled correctly. A lift plan will need to be submitted to the project team to coordinate with the public transportation. Coordination of the removal and replacement of units will be coordinated with Facilities in order to minimize the impact on the school. The Contractor shall be responsible for supplying any Personal Protective Equipment (PPE) necessary to conduct inspection of the work location *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.