Renovation of a water / sewer project in Gurnee, Illinois. Completed plans call for the renovation of a water / sewer project.

The Village of Gurnee will accept sealed proposals for the Removal and Replacement of the Roof at Cemetery Road Pump Station located at 325 N Cemetery Road, Gurnee. The project includes the removal and replacement of the roof at Cemetery Road Pump Station and any additional gutter work. Contact Director of Public Works, Heather Galan, for information at (847) 599- 6800. The Village Board of Trustees reserves the right to reject any proposal for failure to comply with all of the requirements of this notice or any proposal documents; however, it may waive any minor defects or informalities at its discretion. The Village Board of Trustees reserves the right to reject any and all proposals and to award a contract which, in its judgment, is in the best interest of the Village of Gurnee. 1. Removal and disposal of all current roof materials down to the wood decking. 2. Remove old and supply and install approximately 150 square feet of plywood roof sheathing at the northeast corner of building. 3. Remove 3 skylights and install plywood roof sheathing in place. 4. Supply and install Ice and Water Shield minimally to the first 36 inches from the fascia and valleys and cover all exposed roof decking with a minimum of 30# roof felt in all areas with greater than a 3/12 pitch. 5. Supply and install minimum thirty (30) year laminated Tamko Weathered Wood (or approved equivalent) architectural shingles to all areas with greater than a 3/12 pitch. 6. Supply and install a sealed down base sheet to all areas with less than a 3/12 pitch. 7. Supply and install Modified Bitumen Membrane to all roof areas with less than a 3/12 pitch. 8. Remove old and supply and install new lead flashing to all pipe vents. 9. Reinstall and flash around all roof penetrations and utilizing flashing kits, minimal amount of roofing cement and/or caulk shall be utilized. 10. Remove old and supply and install new white aluminum Gutter Apron Flashing around entire roof perimeter. 11. Remove old and supply and install new white aluminum Rake Edge Flashing. 12. Remove old and supply and install new white aluminum 5" seamless K-style gutters around entire roof perimeter. 13. Remove old and supply and install new white aluminum downspouts to grade. 14. The job site needs to be left broom cleaned each evening and on completion of the project the pavement, lawn, gutters and downspouts will be cleaned and debris free.