Site work and paving for a road / highway in Allenstown, New Hampshire. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The Town of Allenstown, New Hampshire is accepting proposals for the paving of Granite St, Deerfield Rd, Clearview Dr, Diane Ave, and Reserve St. The Town of Allenstown reserves the right to reject any and/or all proposals for whatever reason the Board of Selectmen determines is in the best interest of the Town. All questions about this Request for Proposals should be submitted to: Marc Boisvert, Road Foreman Allenstown Highway Department 161 Granite Street, Allenstown, NH 03275 Tel: (603) 485-5460 highway@allenstownnh.gov Valley St, Deerfield Rd, Clearview Dr, Diane Ave, and Reserve St Clearview Dr. Work Area 1. Pave Clearview Dr. 750 feet by 28 feet wide. 2. Shim with 3/8" pavement to reestablish crown in roadway at 2% grade. 3. Overlay with 1.5 inches of 3/8" asphalt. 4. Keyways by Contractor per foot pricing where needed. 5. Sweep and Tack all keyways, shim, top coat, and driveway aprons where needed. Diane Ave. Work Area 1. Reclaim, grade to desired height, fine grade, and compact 190 feet by 24 feet of Diane Ave from Granite St to the End of Town Rd. 2. Supply and install machine pave binder course at 2 inches compacted. 3. Install 200 feet of Cape Cod berm. 4. Keyways by Contractor per foot pricing where needed. 5. Tack all keyways, shim, top coat, and driveway aprons where needed Reserve St. Work Area 1. Reclaim, grade to desired height, fine grade, and compact 515 feet by 26 feet of Reserve St from School St to Cross Street. 2. Supply and install machine pave binder course at 2 inches compacted. 3. Remove and replace 515 feet of sidewalk. 4. Install 600 feet of Cape Cod berm. 5. Keyways by Contractor per foot pricing where needed. 6. Tack all keyways, shim, top coat, and driveway aprons where needed