Renovation of a fire / police facility in Topeka, Kansas. Completed plans call for the renovation of a fire / police facility.

As of 03/28/2022 This project has not been awarded. Q And A Open1/12/2022 1:31:00 AM Q And A Close1/31/2022 11:30:00 PM The City of Topeka is Seeking bids for Fire Station sand and oil separators at the following locations. Locations are Fire Stations #1 (NE Quincy), #2 (SE 6th & Rice Rd.), #4 (SW Clay), #5 (SW 21st & Western), #6 (NE Seward), #7 (SW Oakley) , #8 (SW 27th & Fairlawn), #9 ( SE 29th), #10 ( SW 37th), #11 (NW Lower Silver Lake Rd), and #12 (SW Urish). DESCRIPTION OF MAJOR UNITS OF WORK: The Work at each Fire Station is as follows: 1. Remove existing floor drain and install new trench drain connected to new sand & oil separator in and below the floor of the Apparatus Bay. 2. Replace the existing sand & oil separator located outside the building with a new sand & oil separator in the same location. Reconnect to existing sanitary piping. 3. No work in this fire station in this project. 4. Remove (3) existing floor drains & install (3) new trench drains connected to a new sand & oil separator installed below the floor of the Apparatus Bay. 5. Replace the existing sand & oil separator located outside the building with a new sand & oil separator in the same location. Reconnect to existing sanitary piping. 6. Remove existing floor drain and install new trench drain connected to new sand & oil separator in and below the floor of the Apparatus Bay. 7. Remove (2) existing floor drains & install (2) new trench drains connected to a new sand & oil separator installed below the floor of the Apparatus Bay. 8. Remove existing trench drain & install (3) new trench drains connected to a new sand & oil separator installed below the floor of the Apparatus Bay. 9. Remove (2) existing floor drains & install (2) new trench drains connected to a new sand & oil separator installed below the floor of the Apparatus Bay. 10. Remove (2) existing floor drains & install (2) new trench drains connected to a new sand & oil separator installed below the floor of the Apparatus Bay. 11. Remove (2) existing floor drains & install (2) new trench drains connected to a new sand & oil separator installed below the floor of the Apparatus Bay. 12. Replace the existing sand & oil separator located outside the building with a new sand & oil separator in the same location. Reconnect to existing sanitary piping