Renovation of an educational facility in Chelsea, Massachusetts. Completed plans call for the renovation of a educational facility.

Should the successful bidder fail to commence or diligently perform according to the terms of the contract, the successful bidder agrees to pay to the City of Chelsea, as liquidated damages, Two Hundred Fifty Dollars ($250.00) per calendar day that the successful bidder fails to commence or diligently perform the work in accordance with the contract documents and/or is in violation of the contract. Liquidated damages assessed under this provision shall be deducted from any payment(s) due to the successful bidder. The entire existing roof assemblies shall be removed to expose decking. All repairs needed to be done before new roof installation. B. Install insulation assembly per these specifications. C. Install one ply of specified SA Vapor Retarder sheet directly to the existing wood deck. Install one ply of specified base sheets into modified cold adhesive per specifications. Install specified modified cap sheet into modified cold adhesive perspecifications. D. Seams on mineral cap sheet shall be heat welded with a 4" blade. Base flashing system shall be installed at all projections and perimeters using a 2- ply flashing system. The first ply shall be specified base sheet in trowel grade adhesive. The top flashing ply shall be the specified modified bitumen membrane with a polyester-fiberglass scrim set in trowel grade modified cold adhesive. F. Remove and replace existing roof drains. New Smith 10 10-R-C-CID drains, or equal, shall be installed. Drain diameter shall be determined by diameter of existing drain openings. All drain bowls shall be insulated and sumped with tapered insulation. Remove and replace drain litre down to one foot passed the elbow, approximately eight feet [8'] of pipe to be field verified. The contractor shall be responsible to provide all drain accessories. All drains cleared to 100ft outside of building. G. Miscellaneous flashing, caulking and accessories shall be installed. H. Prefabricated edge metal shall be installed at locations shown on drawings.