Site work for a playground / park / athletic field in Arvada, Colorado. Completed plans call for site work for a playground / park / athletic field.

Alice Sweet Thomas Park Tennis Court Repairs Question Acceptance Deadline 02/01/2022 05:00 PM EST Buyers Requirements General Requirements - Insurance Required 1. Open up a (10') section of fence for machinery access if needed. Reattach existing material after the asphalt has been removed. 2. Strip and completely remove the (1/2") layer of asphalt off the post tensioned concrete courts and the two 12' x 130' areas on each end of the tennis courts sides. All the waste will be hauled off site and legally disposed of. 3. Diamond Grind the tennis courts slab and outside areas to remove residual asphalt and emulsions and any irregularities in the concrete finish. 4. Shot blast the entire tennis concrete slab and two outside areas with steel shot. Two passes of the blast machine will be required to profile and texture. 5. Patch low spots which may hold water in accordance with the ASBA specifications using Rhino Patch Binder and or BSS Polyurethane Patch. This will be measured when temperatures at seventy degrees and rising in direct sunlight after a one hour wait in direct sunlight that covers a Nickel. 6. Clean out the cracks of all debris and fill with RSS Rhino Crack Filler or RSS Epoxy Crack Sealer 7. Apply (1) coat of Beynon Beypoxy 1000 Epoxy Capillary Concrete Sealer with silica sand broadcast into it to provide texture. This work must be completed at night to prevent blistering from the sun. 8. Apply one (1) coat of RSS Acrylic Resurfacer on each of the tennis courts and two outside areas mixed with silica sand and water. 9. Apply two (2) coats of RSS Acrylic Color Coatings with each color chosen for each tennis court and the two outside areas only. Silica sand and water will be mixed into the color to achieve a slow speed of play and to provide texture. Please indicate your color selection upon acceptance of this proposal. Playing Areas____________ Perimeters ________________ 10. Layout and stripe the court with (2") wide lines using RSS Textured White Line Paint in accordance with the USTA specifications for doubles play. RSS Line Tape Sealer is used as a prime coat to ensure crisp edges. 11. Paint the existing net posts, hang the existing nets and clean up debris from the work leaving the courts ready for play. 12. Remove and replace matching all existing chain link fencing and hardware around the tennis courts and the practice court. Add 120 ft of 48" chain link fencing extending from the southwest corner of the practice court, west, 60ft, and from that point, north 60ft. tying back into the tennis court fence. This is where the two pickleball courts will be located. (See attachment A). 13. Remove and rebuild the wooden practice court wall. This would include demolition and removing all materials, redesigning and reframing the structure, and resurfacing the wall. 14. Pickle ball surface will also need to be prepped and painted like the rest of the courts, as well as two sets of pickleball net posts that will need to be installed, and pickle ball nets will need to be set up