Site work for a water / sewer project in Toledo, Ohio. Completed plans call for site work for a water / sewer project.

Component 3: Reconstruction of Dock Face Electrical Project Facility One This project has been assigned a 5% percent EDGE goal Removal and disposal of existing concrete transformer pad and existing bumper posts. Removal of existing panel DR2 and existing concrete pad at the south end of site. Existing circuits will be extended to new panel located at rack R-S as indicated on the drawings. Provide Rack R-S which includes concrete bases, Unistrut, CT Cabinet, Meter Socket and 800 Amp panel as detailed on the drawings. (Note the requirement of StainlessSteel Enclosures). Provide bumper post. Relocated existing rectifier and support to rack R-S. 5. Provide Rack R-S1, which includes concrete bases, Unistrut and Safety Disconnect. This rack will serve the south lift station. Provide (4) bumper post. Provide primary conduit with pull string for Toledo Edison primary conductors. Primary conductors and 15KV terminations will be by Toledo Edison. Provide cost for soft excavation via VAC truck (BADGER) as indicated on the drawings. The contractor shall include multiple mobilization for this item. Extent of soft excavation is indicated on the drawings. Provide concrete transformer pad per Toledo Edison Standards. Include cost for bumper post per details. Provide secondary conduit per drawings. Excavate for Toledo Edison in ground sectionalizer. Sectionalizer box is furnished by Toledo Edison and installed by contractor. Provide secondary conductors as indicated the drawings. Provide feeder raceway and conductors from Rack R-S to Rack R-S1. Coordinate and schedule with Toledo Edison project manager. ALTERNATE SOUTH LIGHTING: Provide (6) High Mast Pole Assemblies and concrete Caisons, include cost for drilling, spoil removal, de-watering, re-bar. Provide bumper posts around each High mast pole. Provide in ground quazite boxes as detailed on the drawings. Provide Photocell, Contactor and Panel on existing Rack R-S. Provide cost for soft excavation via VAC truck (BADGER) as indicated on the drawings. Removal of existing Poles and heads. Removal of existing overhead line spans and (2) High Mast poles. Backfill at all locations of removed items. ALTERNATE NORTH LIGHTING: Provide (5) High Mast Pole Assemblies concrete Caisons, include cost for drilling, spoil removal, de-watering, re-bar. Provide bumper post around each High mast pole. Provide (5) in ground quazite boxes as detailed on the drawings. Provide Photocell, Contactor and Panel on existing Rack R-S. Provide cost for soft excavation via VAC truck (BADGER) as indicated on the drawings. Removal of existing Poles and heads. Removal of (1) High Mast pole. Backfill at all locations of removed items. PHASING: The Port of Toledo operations will continue through construction. As such, the completion of work is to be coordinated with TLCPA and MWTTI. GENERAL: This is a lump sum bid. All quantities shown on the bid sheet are to be verified with the plan documents by the bidder. The sum of the line items may not add up to your total lump sum fee. These unit prices are to be used in the event of an owner directed change to the contract documents. This project is funded through a U.S. Dept. of Trans. Maritime Administration (MARAD) PIDP grant and an Ohio Maritime Assistance Program grant (MAP). The engineers estimate for Component 3: Reconstruction of Dock Face Electrical, Base bid is approximately $450,000.00, Alternate #1 South Lighting bid is approximately $585,000.000, Alternate #2 North Lighting bid is approximately $490,000.00. The combined total bid for this project is approximately $1,525,000.00. Bids that are in excess of 10% above the engineers estimate would be considered non-responsive. This project may be awarded by the Toledo-Lucas County Port Authority at its sole discretion. Please submit all questions to the Port Authority, Tina Perkins at TPerkins@Toledoport.org by Tuesday, February 8, 2022, at 10:00 AM local time.