Drake Road Bridge: - Remove and dispose of asphalt (full depth) 145 m3
- Remove and dispose of concrete barriers, curbs, deck, and deck drains, complete 100% L.S
- Remove and dispose of steel girders, diaphragms, and bearings, complete 100% L.S
- Remove and dispose of wing walls and concrete ballast walls, complete above sawcut lines 100% L.S
- Supply and install reinforcing steel dowels - bearing pad pedestals 80.0 ea.
- Supply and install reinforcing steel dowels - wing walls 16.0 ea.
- Supply and install reinforcing steel - wing walls 100% L.S
- Supply and install reinforcing steel - semi-integral abutments and deck 100% L.S
- Supply and install reinforcing steel - curbs on deck and wing walls 100% L.S
- Supply and install reinforcing steel - approach slab 100% L.S
- Form and pour concrete - wing walls 28.0 m3
- Form and pour concrete - bearing pad pedestals and abutment bearing seat 2.0 m2
- Form and pour concrete - semi-integral abutments and deck 76.0 m3
- Form and pour concrete - curbs on deck and wing walls 9.5 m3
- Form and pour concrete - approach slabs 32.0 m3
- Supply and install elastomeric bearing pads 10.0 ea.
- Supply and erect steel girders 5.0 ea.
- Supply and erect steel end diaphragms, including stiffeners 8.0 ea.
- Supply and erect intermediate diaphragms 12.0 ea.
-Granular A 160.0 tonne
- Granular B 650.0 tonne
- Hot mix HL-8 (50mm) - Base Course 60.0 tonne
- Hot mix HL-3 (40mm) - Surface Course 45.0 tonne
- Installation of rip-rap erosion protection Third Line Bridge: - Partial depth removal and disposal of concrete deck by milling maching to approximately 50mm depth 550.0m2
- Remove and dispose of existing expansion joint assemblies 2.0 ea.
- Remove and dispose of existing bearing pads 20.0 ea.
- Wabo Evazote UV expansion joint assembly 2.0 ea.
- EVA compression joint seal (at sidewalks) 5.0 m
- Supply and install reinforcing steel in expansion joint blockouts 100% L.S
- Form and pour concrete in expansion joint blockouts 5.0 m3
- Clean and paint steel girder ends 300.0 m2
- Concrete overlay 30.5 m3
- Supply and install plate steel for bearing stiffener 48.0 ea.
- Temporary bridge jacking 100% L.S
- Supply and install elastomeric bearing pads 20 ea.
- Installation of rip-rap erosion protection Question Deadline: Mon Feb 28, 2022 12:00:00 PM
.webp)
