Site work and paving for a sidewalk / parking lot in Murfreesboro, Tennessee. Completed plans call for site work for a sidewalk / parking lot; and for paving for a sidewalk / parking lot.

Seal Coating and Striping Preparation o Repair asphalt at each site, where marked with traffic paint o Fill cracks in parking lots and drives prior to the start of project. All bidders should bid for exact linear feet or crack sealing. o Fill cracks that are Y." or larger using Hot Mix Sealer -- parking lot grade. o Seal along edges where patches are placed and along seams where asphalt pads meet. o Thoroughly clean all asphalt areas to be seal coated so they are free of all dirt and debris. o Block off work areas while conducting work Seal Coating o Coal Tar Sealer with the Poly-Tuff additive (added at a ratio of 3 gallons Poly-Tuff per 500 gallons of Coal Tar Sealer). Sand should be added to the mix ratio of 3 pounds per gallon (for grit and anti-slipped surface additive. o Apply commercial grade coal tar emulsion or equivalent which meets or exceeds all the requirements of Federal Government specifications. o The seal coat should consist of two coats, both sprayed. Both coats should be applied in crisscross pattern. o All seal coating should be done when no activities are planned. The contractor must coordinate work with the individual school principals. Striping o Restripe parking lots according to existing layout. o Striping should be done when no activities are planned. The contractor must coordinate work with the individual school principals. o Repainting handicap parking, traffic arrows, no parking and numbers as laid out. o Completion date for this project must be on or before May 15, 2022.