This is a service / maintenance or supply contract in Loveland, Colorado. Contact the soliciting agency for additional information.

Western area power administration (wapa), rocky mountain region (rmr), is seeking quotes for transmission line hardware in accordance with the following: 1. Solicitation provisions/contract terms and conditions (attached) 2. Ipp invoicing/payment requirements (attachment a). Prices of items shall be quoted fob destination to loveland, colorado no separate clin for shipping. All items are brand name or equal (brand name and part number is specified on each line item). Offerors shall clearly indicate on their itemized quote if they are quoting the brand name and part number as requested by the government or indicate or if they are proposing an equal if proposing an equal, your quote shall include the documentation required pursuant to far 52.211-6. Quotes shall include all information as indicated on this sf1449 and/or by the attached solicitation provisions wes-l-2001 addendum to far 52.212-1, instructions to offerors. Failure to include the information indicated may result in your quote being considered noncompliant with the solicitation requirements and therefore not being considered for award. Basis for award will be lowest price - technically acceptable (lpta) when compared with the government's requirements. 00001 splice, full tension, brand name or equal to 6 se preformed line products p/n fts-5123 with the following salient characteristics 1272, 45/7, acsr, yellow; 00002 clamp, brand name or equal to salisbury cat #4345 100 ea with the following salient characteristics: flat face, aluminum body with strain sleeve, w/ serrated jaw and t-handle, .06" - 1.5" range, grade 5 00003 dispenser, safety guy wire, up to 500', 14 gauge, 100 ea brand name or equal to preformed line products p/n sgd-0700 00004 clevis, eye, brand name or equal to afl p/n 30 ea ce-sc-bc with the following salient characteristics: ductile iron, 35,000 lb ultimate strength, mechanical double suspension, with bolt nut and cotter pin, 00005 yolk plate, brand name or equal to afl p/n sumeyp 30 ea with the following salient characteristics double mechanical suspension, opgw, galvanized, 00006 crimpit, brand name or equal to burndy #yc4c4 50 ea with the following salient characteristics: compression ground tap 4 sol. - 4 str., run 6 sol. - 4 str.,die bg or 5/8, 00007 sleeve, splicing, #2 sol copper, brand name or 250 ea equal to nicropress 1-258-x clamp, grounding c-type alum, brand name or equal 100 ea to salisbury p/n 1921 with the following salient characteristics 2.4" - .16" range, with serrated flat lower jaw - acme thread; rated current 400 rms amps, 60 hz; eye with strain relief sleeve; 00009 bolt, eye, oval, brand name or equal to joslyn 25 ea j9412 with the following salient characteristics: 5/8" x 12" hot dip galv cut thread w/sq. Nut forged, 00010 locknut, 5/8" type mf hot dip galv sq.; brand 2000 ea name or equal to joslyn #j8583; or ab chance #3512; or hughes # mf60 00011 locknut, 7/8" type mf galv., brand name or equal 1000 ea to hughes #mf80 00012 rod, armor, brand name or equal to preformed p/n 300 se ar-0132 with the following salient characteristics: al 397.5 m 26/7 76" long; 11 rods/set; purple 00013 rod, armor preformed, brand name or equal to: 15 se preformed p/n ar-0135 with the following salient characteristics: al 556 mcm acsr 24/7-26/7 and 636m 37/w; 80" long; green rod, splice; brand name or equal to: preformed 15 se p/n ls-0140 with the following salient characteristics: 336.4 mcm acsr 26/7; 77" long; 15 rods/set; aluminum grit; green 00015 clamp, grounding, all angle; brand name or equal 24 ea to: ab chance#c6001732 with the following salient characteristics: heavy duty w/serrated jaws jaws pivot at least 75 degrees unmounted equipped w/threaded adapter 00016 clamp, suspension, brand name or equal to 150 ea anderson #has-147sbnk with the following salient characteristics: 1.00-1.47 aluminum body w/socket fitting fits: 266.8 26/7 w/armor rod 715.5 61/0 w/armor rod 336.4 26/7 w/armor rod 795 24/7 w/o armor rod 397.5 26/7 w/armor rod 954 45/7 w/o armor rod 477 26/7 w/armo 00017 ferrule, copper crimp-on for threaded stud type 200 ea terminals, brand name or equal to: ab chance # c600-2624 00018 crimpit, compression ground tap, brand name or 50 ea equal to: burndy #yghc29c29 with the following salient characteristics 3/0 str.- 250 mcm die 997 00019 marker, power line orange hazard sphere 24" 6 ea diameter; brand name or equal to p&r tech p/n wood pole clamp, cbl diam .504/.528/.531 brand 200 ea name or equal to afl# ogw469/561 00021 downlead clamp (steel), brand name or equal to 200 ea afl p/n fdoa-b4b4-b with the following salient characteristics: .0.350-0.500 xx and yy grooves, for 465 fiber, with .25-.75" lattice adapter 00022 compound, joint brand name or equal to afl p/n 20 ea ta-01039 with the following salient characteristics: alcoa no. 2 ejc, 7.94 oz (blue) tube contains grease and flourides and detergents, for flat to flat surfaces, al-al or al-cu, 00023 cloth, hot stick wiping brand name or equal to 120 ea abchance #m1904, 00024 staple, pneumatic, brand name or equal to 15 bx stock-ade #a12635 with the following salient characteristics: 9-gauge x 2", hd galvanized divergent-point barbed, 1000/box, fits stock-ade st400 pneumatic driver 00025 deadend guy grip, brand name or equal to 100 ea preformed #bg-2115 with the following salient characteristics 1/2" galvanized, stranded, deadend, compression assy brand name or equal to 21 se alcoa #e33161 with the following salient characteristics 1272 mcm 45/7 acsr single tongue consists of: body #8136.144 eye #e9512.351 jumper terminal #5136.144 4-hole