Site work and paving for a transportation facility in Oskaloosa, Iowa. Completed plans call for site work for a transportation facility; and for paving for a transportation facility.

The major work items and approximate quantities involved in the proposed work are: Base Project: Mobilization and Miscellaneous - LUMP SUM; Traffic Control - LUMP SUM; Pavement Removal (Full Depth Patches) - 2,930 SY; Unclassified Excavation - 325 CY; Subbase Coarse (Granular) 4" thick - 2,930 SY; PCC Pavement, 6" Thick (Full Depth Patches) - 2,998 SY; Crack & Joints Cleaning & Sealing (Route & Seal) - 200 LF; Runway & Taxiway Painting - 12,380 SF. Alternate A Project: Pavement Removal (Full Depth Patches) - 307 SY; Unclassified Excavation -34 CY; Subbase Coarse (Granular) 4" thick - 307 SY; PCC Pavement, 6" Thick (Full Depth Patches) - 307 SY. Alternate B Project: Pavement Removal (Full Depth Patches) - 308 SY; Unclassified Excavation -34 CY; Subbase Coarse (Granular) 4" thick - 308 SY; PCC Pavement, 6" Thick (Full Depth Patches) - 308 SY; The intent of the contract is to provide for construction and completion, in every detail, of the work described. It is further intended that the Contractor shall furnish all labor, materials, equipment, tools, transportation, and supplies required to complete the work in accordance with the plans, specifications, and terms of the contract. The Owner reserves the right to make such changes in quantities and work as may be necessary or desirable to complete, in a satisfactory manner, the original intended work. Unless otherwise specified in the Contract, the Owner's Engineer or RPR shall be and is hereby authorized to make, in writing, such in-scope alterations in the work and variation of quantities as may be necessary to complete the work, provided such action does not represent a significant change in the character of the work. For purpose of this section, a significant change in character of work means: any change that is outside the current contract scope of work; any change (increase or decrease) in the total contract cost by more than 25%; or any change in the total cost of a major contract item by more than 25%. Work alterations and quantity variances that do not meet the definition of significant change in character of work shall not invalidate the contract nor release the surety. Contractor agrees to accept payment for such work alterations and quantity variances in accordance with Section 90, paragraph 90-03, Compensation for Altered Quantities. Should the value of altered work or quantity variance meet the criteria for significant change in character of work, such altered work and quantity variance shall be covered by a supplemental agreement. Supplemental agreements shall also require consent of the Contractor's surety and separate performance and payment bonds. If the Owner and the Contractor are unable to agree on a unit adjustment for any contract item that requires a supplemental agreement, the Owner reserves the right to terminate the contract with respect to the item and make other arrangements for its completion.