Renovation of an educational facility in Punxsutawney, Pennsylvania. Completed plans call for the renovation of a educational facility.

As of July 20, 2022, this project has not yet been awarded. A timeline for award has not yet been established. **As of July 11, 2022, this project has not yet been awarded. A timeline for award has not yet been established.** Contract No. 1 HVAC Construction. Contract No. 2 Electrical Construction. - Bids shall include a Bid Security Bond or Certified Check, payable to Punxsutawney Area School District, in an amount of five percent (5%) of the bid, in accordance with Instructions to Bidders, as included in the Contract Documents *This project has been identified as part of a stimulus package Description 1) Furnish and install 300 pounds of sheetmetal ductwork, beyond the extent shown on drawings, to be located by the Architect in the field. Sheetmetal per Section 233113. 2) Furnish and install 75 linear feet each of insulated 3" Hot Water Supply & Return piping with fittings, beyond the extent shown on drawings, to be located by the Architect in the field. Pipe and fittings per Section 232113. Insulation per Section 230719. 3) Furnish and install 150 square feet of duct insulation installed on ducts, beyond the extent shown on drawings, to be located by the Architect in the field. Insulation per Section 230713. 4) Furnish and install 200 linear feet of insulated 1-1/4" condensate drain piping with fittings, beyond the extent shown on drawings, to be located by the Architect in the field. Pipe and fittings per Section 230500. Insulation per Section 230500. 5) Furnish and install 12 ton VRF system similar to ACC-01 and associated (4) FC-05 ceiling-cassettes, beyond the extent shown on drawings, to be located by the Architect in the field. VRF system shall include all piping, controls, branch circuit controls, etc., needed for a complete installation. Piping lengths and installation requirements can be assumed to be identical to ACC-01 system. VRF system per Section 238129. 6) Furnish and install 100 linear feet of L5x3x5/16 (LLV) for roof openings, beyond the extent shown on drawings, to be located by the Architect in the field. Structural steel as specified on Drawing H-8.0.