Renovation of an educational facility in Arcata, California. Completed plans call for the renovation of a educational facility.

The Trustees require the successful bidder to achieve three percent (3%) DVBE participation in contracting construction projects as established in the bidding documents, and bidders shall identify the DVBEs to be used to satisfy this requirement in their bids. Any questions should be made in writing to Addie Dunaway at Addie.Dunaway@humboldt.edu before 5:00 p.m. on Friday, March 4, 2022. All Bidders shall present bids under sealed cover and have enclosed an amount equal to at least 10 percent of the total amount bid, including alternatives (if additive), as bid security. Bidders may submit the bid security in one of the following forms: cashier's check, or certified check made payable to the University, or a bidder's bond. The work on this project shall begin as soon as a contract is fully executed, and a Notice to Proceed has been issued, with a Preferred Completion date of Wednesday, August 3, 2022. If work is started and/or completed after August 3, 2022, daily work start times shall be after 9:00 a.m. Total Completion is required by Friday, September 9, 2022 The University reserves the right to waive minor irregularities in proposals submitted. 1. Work includes, but is not limited to, painting of following items, materials, and spaces: a. All exterior exposed surfaces of new or remodeled work as part of the scope of work for the HSU Sunset Roofing project. b. All interior exposed surfaces disturbed as part of the scope of work for the HSU Sunset Roofing project. Exterior and interior surfaces disturbed as required by repair, patching, and/or retrofitting of fixtures should be fully painted to the nearest wall/ceiling plane change. c. Exposed mechanical and electrical items such as piping, conduit, ductwork, panelboards, grilles, and other similar items including their supports except items noted as factory finished. d. Wall and ceiling diffusers/registers (not within suspended act ceilings), wall and ceiling speakers, flush mounted electrical panelboards and cabinets, and television brackets. Field paint to match adjacent surfaces. e. Semi-visible areas behind registers, grilles, diffusers, screen vents, etc. f. Vision panel frames in wood doors even if they are factory finished. g. Hardwood paneling and trim on architectural woodwork and custom plastic laminate casework.