This work involves furnishing all labor, materials, supplies and equipment to replace the existing field turf, in accordance with the plans and specifications prepared by Lamp Rynearson, Inc. of Omaha, Nebraska ("Engineer"). Bids are to be completed on the bid form contained in the Bid Documents. One completed copy of the bid, including all required information, attachments, exhibits and a bid bond as required in Section 1.2, with original signatures by the bidder, are to be submitted to the District in accordance with the Bid Documents. The District reserves the right to accept or reject any or all bids or any part thereof and to waive any and all technicalities and irregularities and award the contract based on its determination of the best interests of the District. A certified check or cashier's check payable to the Board of Education or satisfactory Bid Bond executed by the bidder and acceptable sureties in an amount equal to five percent (5%) of the amount of the bid shall be submitted with each bid. The District reserves the right to accept or reject any or all bids any part thereof and to waive all technicalities and irregularities. Any questions or request for interpretation of these Bid Documents should be emailed to: Philip.Connatser@ops.org Questions must be submitted by email on or before March 4, 2022 at 2:00 pm CT. Substantial Completion of the Work shall be achieved not later than 12:00 midnight on August 1, 2022. Final Completion shall be achieved not later than 12:00 midnight on August 15, 2022. The undersigned further acknowledges that District reserves the right to accept or reject any or all bids and any part thereof and to waive all technicalities and irregularities.The District reserves the right to accept or reject any or all bids and any part thereof and to waive all technicalities. This project involves removing the existing field turf and replacing it with new field turf. The full scope of the Project and the work to be performed by Contractor is set forth in the Plans and Specifications prepared by the Engineer which are a part of the Contract Documents, including more detailed descriptions of the equipment to be installed. Project No - 0121237.01-020
.webp)
