This is a service / maintenance or supply contract in Annapolis, Maryland. Contact the soliciting agency for additional information.

Scope of Services As part of the requirements outlined in the construction documents and project specifications (Attachment F), the scope of testing, inspection, and lab services may include, but is not limited to, the following: a. Earthwork/soils: Soil density and compaction, soil bearing capacity, suitability of soils, asphalt compaction, etc. b. Environmental Conditions: Erosion and sediment control compliance with MDE requirements c.Concrete: Compressive strength, slump, forming, reinforcing, moisture testing, floor flatness, etc. Special inspections in accordance with S-003 and S-004 d. Masonry: Mortar, grout strength, cast stone, etc. e. Steel: Visual inspections (connection, steel and welding materials, bolted and welded connections, painting, etc.), specialized weld testing (magnetic particle, ultrasonic, liquid penetration, radiographic shear stud bond), compliance with erection plans, bearing plates, nelson studs, decking, cold formed metal framing, etc. Special inspections in accordance with S-003 and S-004 f. Roofing Electronic leak detection of new roof prior to substantial completion, green roof, and manufacturer certified third party inspections, etc. g. Fireproofing/Fire Resistant Materials: Further, the scope shall include the following performance requirements: o The Consultant(s) shall provide qualified personnel to construction site, as required, upon 24-hour notice. o The Consultant(s) shall attend necessary onsite pre-installation and construction meetings as required by the MSA, CM, or A/E. o The Consultant(s) shall coordinate sequence of inspections with MSA and Construction Manager as to not delay the construction schedule. Inspections shall be coordinated and performed so the necessity of removing and replacing construction to accommodate testing & inspections is avoided entirely. o The Consultant(s) shall perform specified inspections, sampling, and testing of materials as required by the specifications for this Project. o The Consultant(s) shall prepare lists of uncompleted work, non-conformance reports, and deficiencies notices. Reports shall be submitted to MSA, CM, and A/E simultaneously within (1) day of site visit and/or completion of lab testing. o The Consultant(s) shall supply all field personnel with a direct means of communication and reporting protocols with their office and with the CM/MSA. o The Consultant(s) shall be responsible for providing, storing, and protecting their own tools, materials, and equipment. This includes the provisions for concrete cylinder cure boxes. o The Consultant(s) shall comply with the CM's safety plan Intumescent paint, spray applied fireproofing, firestopping, etc. h. Waterproofing and Air Barriers Inspect surface prep, application, flashing, protection, drainage components. Preconstruction testing and inspection of mockup for air barrier i. Windows and skylights Perform air leakage, water resistance testing, structural adhesion testing, etc. j. Painting: Pre-installation testing of interior and exterior paint material A copy of the 70% Construction Documents have been included in Attachment F. Work on this Contract will start as early as May 2022. Consultant's work will be managed and coordinated directly by the CM for this Project. The current estimate of the specific tests and estimated man hours is included in the Pricing Form (Attachment H). Questions All questions regarding this RFP shall be submitted electronically, in Word or PDF format, via the following upload link no later than March 11, 2022 at 1:00 p.m. (Local Time)