This is a service / maintenance or supply contract in New York, New York. Contact the soliciting agency for additional information.

Electrical work includes but is not limited to providing the following maintenance, repair or replacement of electrical equipment and systems: Wiring devices and installation components. . Switchboards. Panelboards. Fuses. Safety and disconnect switches. Surge Protective Devices (SPDs). Wire and cable. Power and lighting distribution systems. Lighting fixtures. Grounding and bonding in conformance with applicable codes. Duct banks and manholes. Raceways and installation components and all required supports. Excavation and backfill (excavation in rock shall be included). Cutting and core drilling associated with electrical work. All sleeves and through-penetrations for electrical systems through floors, roofs and walls where required, including waterproofing, firestopping, fireproof sealing. Electrical identification. Obtain approval and pay for all required permits and inspection certificates including controlled and special inspections. All supports and mounting hardware, etc. for circuits and raceways run inside the building and on the exterior of the building. Interconnections and interfacing with pertinent existing systems shall be as required to achieve fully integrated operation of systems, as described in these Specifications. Temporary light and power equipment and systems. All cutting, patching, painting and restoration of existing ceiling, walls, etc. to fully coordinate installation of all electrical systems. Prime painting, where required for electrical equipment and installation. RFQ Question Deadline 3/14/22 Question and Answer Release Date 3/18/22