Site work and paving for a sidewalk / parking lot in Kirksville, Missouri. Completed plans call for site work for a sidewalk / parking lot; and for paving for a sidewalk / parking lot.

Work covered by these specifications and maps includes the furnishing of all materials, labor, tools, appliances, equipment, services, etc., necessary for asphalt milling and asphalt overly as specified herein on the campus of Truman State University. All work shall be subject to the terms and conditions of these project documents The purpose of these specifications and maps is to obtain all labor, tools, materials, and equipment necessary for asphalt milling and asphalt overly as specified in the enclosed documents on the campus of Truman State University. The approximate square footage of must be verified on-site by the bidders. The selected Contractor shall conform to all requirements of these specifications and map. In case any point with regard to the true extent of these specifications and drawings are not fully understood by the bidder or if there is any doubt as to the items to be included in their bid, the bidder shall contact the Director of Physical Plant, or his designate, for such further instructions as may be necessary. In no case shall a bid be submitted in uncertainty. These specifications and drawings and or maps are intended to fully cover all phases of work involved. Should a case arise in which they apparently do not, the Director of Physical Plant, or his designate, shall decide such questions and the decision shall be final and binding on all parties. Notification of changes will be made in the form of a written addendum and forwarded to all bidders currently holding specifications and supporting drawings for this project. The selected Bidder, upon their failure or refusal to execute and deliver the contracts and bonds required within the two (2) week period, agrees to forfeit to the Owner, for such failure or refusal, the security deposited with their bid. No work will be considered accepted which may be considered defective or deficient in any of the requirements of these specifications and drawings. The selected Contractor will be required to correct any imperfect work whenever discovered within a one (1) year period of final acceptance by the University. All work performed by the selected Contractor shall besubject to the approval of the director of Physical Plant, or his designate, at all times during the progress of the work. The Owners property and the work performed, as well asthe materials to be used, shall at all times be thoroughly protected from the weather and other causes, and all damage resulting from such neglect shall be made good by the selected Contractor at their own expense. Work shall commence upon receipt of an Agreement and Purchase Order from the University Purchasing Agent and shall be completed on or before June 20, 2022. The Owner reserves the right to reject any or all bids and to waive any technicalities therein