Privately Funded
Bidding Soon
Documents Available
Publicly Funded
Addenda Available
Post-Bid
Saving Project...
Site work and paving for a transportation facility in Dexter, Missouri. Conceptual plans call for site work for a transportation facility; and for paving for a transportation facility.
Projects may be subject to future receipt of Federal funding under the Federal Aviation Administration (FAA) Airport Improvement Program, as administered by the Missouri Department of Transportation (MoDOT) through the State Block Grant Program (SBGP). These projects may include the following: 1. Runway overlay and marking, estimated cost $1,600,000. 2. Drainage Improvements, estimated cost $300,000. 3. Vehicular parking and fencing improvements, estimated cost $500,000. 4. Hangar improvements, estimated cost $1,000,000. 5. New agricultural operations area, estimated cost $300,000. 6. Site and aeronautical surveys for proposed improvements, and instrument approach procedure development and Airports GIS requirements. 7. Assistance with required environmental actions and documentation. 8. Assistance acquisition of land and rights for airport development, and for compliance with FAA standards and regulations. The required services include, but are not limited to, engineering services for preliminary, design, bidding, and construction phases and incidental special services including geotechnical, preparing categorical exclusion documentation, as-built ALP updates, and surveying. The consultant should provide the name(s) of preferred firm(s) for any work which is likely to be sub-consulted. Sub-consultant changes can occur with Sponsor approval. At the Sponsor's discretion, this selection can be retained for projects initiated within five years or until all projects are complete. Projects other than those listed above will require a new solicitation except as allowed in FAA Advisory Circular 150/5100-14 paragraph 2.7.2 (4). Disclosure: Under a previous agreement, Waters Engineering assisted the Sponsor with preparation of their CIP and the above cost estimates A qualification based selection process conforming to FAA Advisory Circular 150/5100-14 will be utilized to select the most qualified firm. Selection criteria will include: o Recent experience in airport projects o Capability to perform all aspects of project o Ability to meet schedules within budget o Knowledge of FAA/MoDOT design and construction standards o Knowledge of FAA/MoDOT regulations, policies and procedures o Quality of previous airport projects undertaken o Personnel experience and qualifications o Familiarity with and proximity to the project o An implemented Affirmative Action Program Fees will be negotiated for projects as federal funds become available. Consultants shall not include fee or cost information when responding to this solicitation. Prospective consultants are advised that applied overhead rates must be in accordance with the cost principles established within Federal Regulation 48 CFR Part 31, Contract Cost Principles and Procedures. After selection, the successful firm will be required to submit a copy of their current overhead rate audit certification or MoDOT prequalification. The consultant should also provide an affidavit of compliance with the federal work authorization program and a copy of the firm's EVerify Memorandum of Understanding (15 CSR 60-15.020). Questions regarding this solicitation can be directed to Trevor Pulley at 573-624-5959 The method of contractor selection has not been determined at this time. MODOT - RFQ Engineering - Dexter Municipal Airport, Airport Planning Consultants
Conceptual
Transportation Terminals
$3,700,000.00
Public - City
Paving, Site Work
Plans and Specifications are not available for this project. If that changes, they will be made available here.
Trades Specified
Division 00 - Lorem Ipsum
Find More Local Projects
Within 75 Miles of This Project
One Low Price
- One license and one market
- Details and key contacts on all bidding projects
- Organize your pipeline with a digital bid board
- Automatically match opportunities to your profile
- Saved searches deliver daily project leads to your email inbox
Market Pricing Around
- All Starter Product functionality
- Access to all documents (plans, specifications, and addenda)
- Access to planning projects
- Access to contact information
- Ability to Export
You’ve Reached the Free View Limit
Want to see more project and bidder data in your market? Check out our product options and see what works best for you and your business.
Come back in [[refresh_days]] to get [[project_count]] more free projects.
May 2, 2023
1805 E Stoddard St, Dexter, MO
Related To This Project
Dexter, MO
Bid Date: Jan 30 2020
Dexter, MO
Bid Date: Mar 28 2024
Dexter, MO
Bid Date: Jun 24 2024
Dexter, MO
Bid Date: Jun 19 2024
Dexter, MO
Bid Date: Jul 26 2024
Dexter, MO
Bid Date: Aug 21 2024
Dexter, MO
Bid Date: Aug 21 2024
Dexter, MO
Bid Date: Sep 26 2023
Dexter, MO
Bid Date: Aug 24 2023
Dexter, MO
Bid Date: May 17 2023
Dexter, MO
Bid Date: May 17 2023
Dexter, MO
Bid Date: May 02 2023
Dexter, MO
Bid Date: Mar 28 2023
Dexter, MO
Bid Date: Apr 22 2020
Recently Viewed
--
--
--
--
--
--
--
--
--
--
The data you need to build the relationships you want. Try it free.
Sign up now to get free company and project data. No payment required.
Get the right
data with Project Intelligence
Project Shared
with
example@example.com
Choose what you would like to do.
Seen enough? Want to see more? Subscribe on your own or talk to one of our sales reps.
What is your business type?
We have a wide variety of products that are purpose built for certain business types.